Loewe L 32, L 37, L 42, A 42 manual For your safety, Heating from radiators

Page 10
10 cm
10 cm
10 cm

For your safety

For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions:

This TV set is designed exclusively for reception and reproduction of video and audio signals.

• This equipment is designed for domestic and office environments and must not be used in rooms with high humidity (e.g. bathroom, sauna) or high concentrations of dust (e.g. workshops). If the equipment is used in the open air, ensure that

it is protected against moisture (rain, drips, splashes, sprayed water or dew). Do not place any containers filled with liquids or lit

candles on top of the TV. High levels of moisture and con- centrations of dust cause leakage currents in the equipment, which

can lead to danger of electric shock or fire.

The manufacturer‘s warranty is only valid for use in the specified permissible environment.

If you have moved the TV set out of the cold into a warm environment, leave it standing for about an hour since condensation may form.

This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate; use the power cable provided. Incorrect voltages can damage the equipment.

Like all electronic equipment, your TV needs air for cooling. Obstruction of the

air circulation can cause fires. Therefore the air vents on the back must always be kept free. Please do not place newspapers

or cloths on/over the TV. If the TV is placed in a cabinet or on a shelf, lea- ve at least 10 cm at the sides and 10 cm at the top to ensure sufficient air circulation.

Position the set so that it is not exposed to direct sunlight and additional

heating from radiators.

Prevent any metal parts, needles, paper clips, liquids, wax or the like from get- ting into the TV set through the air venting slits in the rear panel. This can lead to short-circuits and possibly to fire. If something should get into the inside of the TV set, pull out the plug immediately and notify customer service.

Never remove the back of the TV set yourself. Repair and servicing of your TV set should only be carried out by authorised TV technicians.

Place the TV set on a level, firm base. The set should not protrude at the front when installing in cabinets or shelves.

Only use original accessories if possible, e.g. Loewe wall holders and stands. Never let children handle the TV unattended.

Do not allow children to play in the immediate vicinity of the TV, they could knock, shift or pull it over and injure someone.

Never leave the TV on unsupervised.

Do not install the TV where there may be vibrations. Vibrations can lead to material stress.

Pull out the power and antenna cables during thunderstorms. Surge voltages caused by lightning strikes can damage the TV through the antenna system and the mains. Also remove the antenna and mains plugs in long periods of absence.

The mains plug of the TV set must be easily accessible so that the set can be disconnected at any time.

Lay the mains cable in such a way that it will not be damaged. The power ca- ble may not be kinked or laid over sharp edges, not stood on and not exposed to chemicals, the latter also applies to the device as a whole. A mains cable with damaged insulation can lead to electric shocks and is a fire risk.

When removing the mains plug, pull the plug housing and not the cable. The wires in the plug could be damaged and cause a short circuit the next time it is plugged in.

- 10

Image 10
Contents Operating Instructions Contents Digital Recorder Remote control TV functionsDirect recording +/PControl unit Connections to rear panel Xelos a Connections to rear panel Xelos a 32/37 and Modus L 32/37 Connections to rear panel Xelos a 42 and Modus L Welcome Packing and box CleaningDisposal SetFor your safety Heating from radiatorsRemote control First installationConnection Use of the binders for Xelos A42 and Modus L Using the conditional access moduleSwitching on Side of the moduleColoured key Settings can be selected by pressing one of the directionsAutomatic programming Station sortingSwitching on/off Directing DVB-T antennaDaily operation Changing stationsBasics about the Menu operation Example of the menu operationFor the info system Call the TV menu Select SettingsInfo text indicates which settings you can make in Stations Select Stations in the line belowFor the index This is how to select the index itemUse the OK button to call Switch off Automatic Use P+/P- to scroll up or down through the pagesPicture settings Setting the soundDirect control on TV set Show status display How the coloured keys work in TV modeOperating modes TV Calling the indexCalling additional functions Call timer overviewUnder Settings you will find the following functions Select picture formatDVB subtitles Inserting a new CA module Installing new DVB softwareRemoving the CA module Searching for new softwareImage+ Image+ demo modeImage+ menu Operating modes PIP Picture in picture PIPSwitch to small PIP Switch to split screenSetting the PIP type Functions in the PIP menuOperating modes EPG Using the EPGSwitch EPG on/off EPG Programme guideEPG menu Switch on TV when markedProgramming recording for recorders Selecting providers and stationsOperating modes Teletext Analogue TeletextDisplay teletext menu Programme timer recordingsTeletext menu Programme wizard for recording via teletextRadio menu Operating modes RadioRadio Call radio menuOperating additional equipment Login and connect equipmentConnecting video/DVD recorders Start search with the blue coloured keyCalling AV inputs in the AV selection Call AV selection Timer recording with video or DVD recorderVideo playback Calling AV input via the station listAudio input Audio Digital Assignment of digital audio inputs and outputsAudio output Audio Digital OUT Loewe Flat-TV Connecting other audio amplifiers or active speakers VGA/XGA connection Setting colour standardHdmi DVI connection Set geometry as described for VGA/XGA connectionSound from PC or Set Top Box Component video connectionLog in the component/device in the connection wizard Return to using the remote for the TV Use the remote control to operate one of the DVD playersUse the remote control to operate a recorder Set remote controlProblem Possible cause Remedy What to do, ifDts, Mpeg Digital Link Plus does not functionReplace the Euro-AV cable ConnectedType Modus L Technical dataGeneral data Type Xelos aElectrical data ConnectionsAccessories Retrofitting options Item no. version PIP-Tuner DigitalService Center Loewe Service addressesPlac Kaszubski