3.3Adjusting Audio Settings
English
1Press MENU to enter the OSD Main Menu screen.
2Press / on the remote control or CHS / CHT on the control panel to select Audio menu.
Picture | Audio Mode |
| |
| Equalizer |
Audio | Balance |
| MTS |
Channel | Auto Volume |
| |
Recall | |
| |
Setup |
|
3 Press / OK on the remote control or |
|
|
|
|
INPUT/ VOL+ on the control panel to |
|
| ||
Move OK Enter | Return | Return | Menu Exit | |
enter the Audio menu. |
|
|
|
|
4Press / on the remote control or CHS / CHT on the control panel to select an item.
5Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter the item.
6Press / on the remote control or VOL+/ VOL- on the control panel to change the scales or press OK on the remote control or INPUT/ VOL+ on the control panel to mark an item.
7Press RETURN to return to the Audio menu.
8Press MENU/ VOL- to exit the Audio menu.
9The Audio menu can be used to adjust the Audio Mode, Equalizer, Balance, MTS (ATV only), Auto Volume (ATV only), and Recall settings. Equalizer is available for adjustment only if you select User in Audio Mode.
•The Audio Mode can be set to Dynamic, Standard, Soft, or User.
•Press / on the remote control or VOL+/ VOL- on the control panel to adjust the scales in Equalizer and Balance.
•The MTS can be set to Stereo, Mono, or SAP. •The Auto Volume can be set to Off or On.
•The Recall can be used to reset the original factory settings.
Note:
The items available on the OSD may vary depending on the input signal source.
29