4.During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting.
5.Buttons other than CH+/CH- are not functional during search. Channel buttons include CH+ and
6.1.6Factory Setting Mode
Factory setting operation procedures are as follows:
1.Press the corresponding electronic equipment button. The indicator light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing setting mode has been entered.
2.While holding the electronic equipment button, first press < (left arrow), then press OK. The indicator then goes off and setting mode is exited, showing factory setting has been restored.
3.During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting.
4.Pressing any of the electronic equipment buttons to enter factory setting operation mode.
5.The default current electronic equipment is TV upon first
Electronic | Code | Note | |
equipment | |||
|
| ||
|
|
| |
TV | 1001 | Provided by | |
manufacturer | |||
|
| ||
|
|
| |
CABLE | Transmit TV code | ||
|
|
| |
AUDIO | Transmit TV code | ||
|
|
| |
DVD | Transmit TV code | ||
|
|
|
English
39