HANNspree 1506-060B000 manual Setting the TV on the Wall, Wall mounting the TV

Page 50

7

Setting the TV on the Wall

Dissembling the stand base:

1Disconnect all the cables and cords from the TV to prevent breakage.

2Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.

3Squeeze the sides to release the retaining plastic tabs and pull the stand cover off.

4Remove the six (6) screws so that the stand base can be removed.

5Gently remove the stand base.

( For reference only )

Wall mounting the TV:

1 Purchase a VESA compatible wall bracket: VESA 100 X 200, 6 holes, M4, 8mm, 20 kg.

2 Locate your ideal TV position on the wall.

3 Fix the wall bracket firmly on the wall.

4 Secure the TV to the bracket using the 6 mount holes on the back and center of the TV.

Note:

Please read the instructions of your specific wall bracket to properly wall mount the TV.

The pitch of the mounting holes is 100mm horizontally and 100mm vertically.

The screws type required is metric: M4, 8 mm length.

The 28" TV stand base can be screwed on a table or a hard surface using the hole on the back of the stand base.

*Installing the LCD TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hannspree bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.

English

49

Image 50
Contents 1506-060B000 Table of Contents Table of Contents Regulatory Information FCC Compliance Statement1Description of Warning Symbols Safety Notices Installation Safety Notes LocationImportant Safety Instructions English Personal safety Warranty and Service PrefaceCopyright Package Contents Getting StartedFeatures Introducing the TVControl Panel Description Button Function MenuInput and Output Jacks Description Connector Function Remote Control Description Icon Function Input sourceDVD English Inserting the Remote Control Batteries Connecting an Antenna or Cable TV Setting up your TVBasic Connections Power Connection Connecting External Devices Connecting External EarphonesConnecting to AV Devices Connecting a VCR/ STB/ DVD Player Using Component Video Connecting a VCR/ STB/ DVD Player Using Composite VideoConnecting a PC using VGA Connecting a PC using DVIConnecting Hdmi Hdmi Cable Optional DVD PlayerAdjusting the Volume Using the TV Turning the TV On and OffSwitching Source Signals Performing an Automatic Channel SearchEditing Channel Table or Favorite Channel Adjusting On-Screen Display OSD Settings Main MenuOSD Setting Menus Adjusting Picture SettingsAdjusting Audio Settings Adjusting Channel Settings Channel menuAdjusting V-CHIP Settings Adjusting Setup Settings Enter the Setup menuTroubleshooting Situation SolutionSpecifications ATV Ntsc DTV AtscPC Mode Support Timing Video Mode Support TimingSetting Program Codes IntroductionSetting Volume Lock Searching CodesSetting Channel Lock Factory Setting Mode Transmit Cable code Unlocked Buttons Information Power-out Protection CapabilityOther Descriptions Double Clicking Setup Code for VCR’s Component Program CodesMEI Setup Code for DVD’s Setup Code for Cable Setup Code for Satellite Setup Code for Audio Amp / Tuner’s 3010 Setting the TV on the Wall Wall mounting the TVUsing the Cable Organizer