Loewe Centros 2102 HD manual Operating additional devices, Using a code input to set the remote

Operating additional devices

Using other Loewe devices with the RC3 remote control

You can use other Loewe devices with this remote control.

Use the rotary switch to select VCR, TV or a set-top box.

Loewe video recorders, Loewe tel- evision sets and the d-box which is commonly used in Germany as a

set-top box are set up ex-factory.

Using the drive buttons in the TV and STB position for a VCR, DVD or digital recorder

With both the TV and the STB, you can switch over

the six drive buttons (		,	,	,
,	,	) so that they control a VCR

or DVD player/recorder (e.g. Centros 21x2) (ex-fac- tory it is set to control the built-in “Digital Recorder

Plus“):

DVD		TV
		STB	First set the switch to the main TV
VCR			or STB function.
			Then press the END and * EPG
			buttons simultaneously for at
			least 5 seconds. The display in
		EPG	the top left of the remote control
	wxyz		will fl ash twice.
			Key in the fi gures 988. The dis-
	tuv
			play will fl ash twice more.
	tuv
			Now set the switch to the func-
			tion that you require for the drive
			buttons:
			to DVD or VCR, or TV if the digital
			recorder is to be used.
			Press the # PIP button to fi nalise
		PIP	the setting. The display will fl ash
			another two times.

Setting the remote to control devices made by other manufacturers

You can set the remote to work with other video recorders, DVD players or set-top boxes if the infra-red code of the device type appears in the code list or if it is held in the RC3‘s code memory.

Even if the device‘s manufacturer appears in the code list, it could be that the device cannot be controlled.

Using a code input to set the remote

Find the right code number for your unit in the “Code list RC3” (in the middle of this booklet). The list is sorted according to device type – DVD, VCR, STB – and alphabetically by manufacturer. You will fi nd one or more code numbers next to the manufacturer name.

Use the rotary switch to select whether you want to switch to using a VCR, DVD device or a set-top box.

Press the END and * EPG buttons simultaneously for at least 5 seconds. The display in the top left of the remote control will

EPG	fl ash twice.
AV	Key in, one at a time, the four
	fi gures that you have found in the
jkl	code list (e.g. 0539 for the Loewe
def	DVD player).
wxyz	After each fi gure that you key in,
	the display will fl ash once, and
	after the last fi gure it will fl ash

twice. If the fi gure was wrong, the display will stay illuminated for longer. This means that the code number has not been accepted. If a double-fl ash signifi es that the code has been accepted, you can test the functionality of the device that you have programmed.

If you are unable to control the device, or have diffi culty in controlling it properly, repeat the code input with the next code in the list. If there are no other codes listed for the manufacturer in question, try using the remote control‘s suggestions.

Using the remote‘s suggestions to set up remote control

Switch on the device which you want to convert the remote control to. Note that Standby is inad- equate!

	Use the rotary switch to select
	whether you want to switch to
	using a VCR, DVD device or a
	set-top box.
	Press the END and * EPG buttons
	simultaneously for at least 5
	seconds. The display in the top
	left of the remote control will
	fl ash twice.
EPG	Key in, one by one, the fi gures
wxyz	991. The display will fl ash once
	after each fi gure is input.
wxyz
	Press the # PIP button to select
	the fi rst code.
PIP	Point the remote at the device
	which you want to convert it to
	control. Watch the device.
	Now press the (Play) or On/Off
	buttons on the remote control.
	Wait a moment for the device to
	react. If the device fails to react,
	this is not the right code. Press
	the # PIP button again to get the
	next code.
PIP	Press the	(Play) or On/Off but-
	tons again.

If the device reacts, press the * EPG button to copy over the code.

EPG

63 -