Initial Installation
Navigating in Menus
In this operating manual the RC3 remote control arrow keys are represented as follows:
The arrows correspond to
““ in the text.
OK | The OK function is represented as |
| |
| “OK“ in the text. |
1.Press 
.
The menu is displayed.
2. | Select the desired option with | / . | |||
3. | The desired entry is selected. Press | to call up | |||
| the corresponding second level. |
|
| ||
4. | Select the second option with | / . |
| ||
5. | Press | / | to call up the corresponding third | ||
| level. |
|
|
|
|
6. | Use | to select the desired settings and confi rm | |||
your selection with OK.
Some options required additional steps.
7. Press 
to quit the menu.
Activating Digital Link
With Digital Link, Loewe TV sets pass on the remote control signals to Centros via the Euro- AV connection. Digital Link is useful if you want to install Centros in a concealed place, e.g. in a closed rack.
•Switching on Digital Link.
Centros must be switched on. Press the 
key on Centros for > 3 secs. “LINK“ appears briefl y in the Centros display.
•Switching off Digital Link.
Centros must be switched on. Press the 
key on Centros for > 3 secs. “FRONT“ appears briefl y in the Centros display.
Activating Progressive Scan
With the “Progressive Scan” you get the highest possible picture quality without fl ickering in the “Component Video” mode (VIDEO OUTPUT switch on the back of Centros set to “COMPONENT”) in display units which support this operating mode. If Centros is switched on: Press the PIXEL button on the device short. “576P” appears in the unit display, Centros is switched to Progressive Scan. By pressing the PIXEL button on the unit again, you can switch Centros back to the “Interlaced” mode (unit display shows “576 I”).
The General Menu
Automatic Programming
This DVD recorder is fi tted with a tuner capable of receiving up to 88 channels.
Note: The channel is set automatically when using Digital Link Plus.
Preparation:
Connect the DVD recorder to the aerial system. See “Connecting to the Aerial“ on page 13.
1.Press 
.
The menu is displayed.
2. | Select the “General“ option with | / . | |
3. | Press | to call up the second level. |
|
4.Select the “Auto Programming“ option with / .
5. | Press | to call up the third level. The country | ||
| option is highlighted. |
|
| |
6. | Select a country with | / | and press . | |
| The “Start Search“ symbol is highlighted. | |||
7.Press OK to start the program search.
The tuner cycles automatically through all avail- able channels and transfers all programs found to the tuner‘s memory.
|
|
|
|
|
|
| |
Auto Programming |
|
|
| Germany |
| ||
Program Edit |
|
|
|
|
|
| |
|
|
| Stop |
|
| ||
|
|
|
|
|
| ||
Clock Set |
|
|
|
|
|
| |
TV Aspect |
|
|
|
|
|
| |
Searching 11% | |||||||
Display Mode | |||||||
|
|
|
|
|
| ||
Decoder at AV1 |
|
|
|
|
|
| |
PBC |
|
|
|
|
|
| |
Factory Set |
|
|
|
|
|
| |
Power Save Mode |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Digital Link Plus
If you have connected the DVD recorder to a Loewe TV set with Digital Link Plus or a comparable system from another manufacturer (e.g. EasyLink, Mega Logic, Project 50), the program list will be transferred from the television set to the DVD re- corder. This takes place when you register the DVD recorder with the TV set, or when you make any changes to the programs on the TV set
The DVD recorder detects a connected TV set with Digital Link Plus or a similar system from another manufacturer and adjusts the DVD recorder accord- ingly. This means that you cannot search for, delete or sort TV programs on the DVD recorder. The menu items are grayed out; during the automatic search it is only possible to transfer the program information from the TV set. Note that all programs that you receive via aerial or cable must be stored in program numbers 1 to 88 on the TV set.
If the TV set does not ask you to transfer the program information, then start the transfer on the DVD recorder. If your TV set is equipped with Digital Link Plus or with a comparable system from another manufacturer, only carry out program changes on the TV set.
If the TV set that you have connected to the DVD recorder does not have Digital Link Plus or a comparable system, then you should harmonize the DVD recorder and TV set program lists. This will help you to fi nd programs on the TV set and DVD recorder.
17 