Installation Location and Handling

Caution and care (continued)

•Place this unit horizontally and in a stable place. If this unit is not placed correctly and used in an unstable place, the unit may be damaged such as removal of the DVD/CD disc.

•Do not place this unit close to other electronic or magnetic equipment. This will avoid video and audio distortion.

•When a monitor and this unit are placed vertically, the pictures may be distorted or DVD/CD disc may not be ejected.

•Do not let stick your hands into the disc loading slot. You may get your hand caught in the slot and may got injured. If you get your hand caught, do not get out of the slot by force. Contact your dealer after turning off the power and disconnecting the plug.

DVD/CD DISC

•Do not use the disc cracked, deformed or repaired with adhesive. The disc may ﬂy into pieces and cause injury.

•Do not touch the playback surface when holding the disc.

•When dew condensation occurs on the disc, wipe the surface off before use.

•Dirt such as ﬁngerprints or dust causes the deterioration of the picture quality and audio quality. Gently wipe the DVD/CD disc from the center to the outside with a soft cloth.

•When the disc is very dirty, soak a soft cloth with water and screw water of it, wipe off the dirt lightly, then wipe with a dry cloth.

•Do not use solvent such as benzine and thinner, a record cleaner, and static-stopper. They may damage the disc.

•Do not use the disc described below. They may damage the disc itself or this unit. Discs on which a piece of paper or sticker is put, or a disc damaged.

Discs which the label is peeled or a disc with oozing. Discs cracked, deformed, or repaired with adhesive.

•Store the disc in the speciﬁed casing, avoiding the following places. Places where it will be subjected to direct sunlight.

Places with excessive dust.

Places where it will be subjected to high temperatures or high humidity.

•DVD movie (cinema) or personal recorded picture cannot be played back on this unit. Only the pictures recorded on this unit can be played back.

•Do not use the disc which has been used on the personal computer, failed to be copied, or stopped during copying due to the power failure because they may cause malfunction of the unit.

•Although you can copy the data on DVD/CD with this unit and playback that data on the personal computer using the supplied application software, not all the personal computers or DVD/CD drives are ensured for proper playback of such data.

MAINTENANCE OF THE LENS FOR RECORDING/PLAYBACK (LASER PICKUP)

•When any dust adheres on the lens for recording/playback, the picture may be distorted or the audio may skip. Also normal recording or playback may not work. Ask your dealer how to correct this problem.

Be careful, do not use the commercial lens cleaning disc, they may damage the lens.

PRECAUTION CONCERNING EXTERNAL DEVICE

•The various external HDDs can be connected to this unit in order to expand the memory or to use as the copy device. However, during recording or playing back a picture at high rate, some pictures may be missed due to the slow rate of data transfer or the slow speed of response from the external device connected. Be sure to check the operation sufﬁciently in advance.

•Do not use the power control function of the external device which uses bus power of this unit.

•The external device to be used may be unsuitable for the operation you want to set. It is recommended to consult your dealer when using the external device.

DX-TL4716U specifications

The Mitsumi electronic DX-TL4716U is a versatile and highly regarded electronic component that is primarily utilized in a range of industrial applications, particularly in automation and control systems. This device stands out due to its advanced capabilities and robust design, making it an essential component for modern electronic systems.

One of the main features of the DX-TL4716U is its highly efficient power management system. It is designed to operate seamlessly with various power supply configurations, ensuring that it can accommodate different operational environments. This adaptability makes it suitable for use in both consumer electronic products and high-demand industrial machinery.

The DX-TL4716U also supports multiple communication protocols, including I2C, SPI, and UART. This versatility allows the component to interface with a plethora of microcontrollers and other devices, optimizing integration into larger systems. The ease of communication it provides is essential for real-time data transfer and control, which is a significant requirement in fields such as robotics and telemetry.

Moreover, this component is equipped with features that enhance its reliability and efficiency. It comes with built-in protection mechanisms against over-voltage, over-current, and thermal overload. Such attributes ensure longevity and stability, critical for applications where downtime can result in significant losses.

The technology behind the DX-TL4716U incorporates advanced semiconductor materials, allowing for lower power consumption while maintaining high performance. This focus on efficiency is imperative in modern electronics, where energy conservation has become a priority. The device operates at a wide range of temperatures, making it suitable for applications in harsh environments.

In terms of physical characteristics, the DX-TL4716U is compact, enhancing its integration into various electronic layouts without requiring excessive space. This design consideration allows engineers to maximize the functionality of their systems without compromising on space.

In conclusion, the Mitsumi electronic DX-TL4716U exemplifies cutting-edge technology in the realm of electronic components. Its remarkable features, including versatile communication options, efficient power management, and robust protective mechanisms, position it as a key player in the fields of automation and control. As industries continue to evolve towards greater efficiency and reliability, the DX-TL4716U is well-equipped to meet these demands.