Copying the recorded data | Mitsumi electronic DX-TL4716U guide

Copying the recorded data (continued)

Copy Data to Copy 2 Drive/Set Copy 2 Drive

Copy 2 is a backup or archive feature. This item is used to copy the data to Copy 2 device by specifying only the start point. The point is speciﬁed by the date and time or the book- mark. The copy continues until the end point of the recording data reaches or the media to be copied becomes full unless the copy is stopped manually (when “FIFO Overwrite” is set to “Off”). This function is useful for making backup of the re- cording data.

Before executing the copy, make sure that the Copy 2 device is connected and set in the <Add/Remove HDD Device> and <Add/Remove DVD/CD Drive> correctly. (System Menu Memory)

User Menu

2 Copy

step 4

2Copy Data to Copy 2 Drive

step 3

1 + 2 Range of Copy

steps 1, 2

4Set Copy 2 Drive

step1. Set the camera number to be copied.

•The button function changes between “All Off” and “All On” each time you select this button. You can switch on and off for all the cameras easily by using this button.

•The picture is not copied when there is no recorded picture of the set camera number or time.

step2. Select “Other settings” and then set the detailed settings.

From Main: Sets the area which contains the data to be copied. The available setting items are “Normal,” “Alarm,” and “LPA.”

To Copy 2: Sets the group to where the data is copied. The available setting items are “SerialBus,” “DVD/CD,” and “Internal.”

Copy Data: Sets the data area to be copied. The available setting items are “Alarm” and “All.” Overwrite: Selects whether or not to overwrite the existed data.

Auto Eject: Selects whether to eject media (CD/ DVD) automatically when the copy is over.

FIFO Overwrite: Selects whether to repeat copying from the start point of the media by overwriting the existed data, or to stop copying when the capacity of the media becomes full during copying. This setting is available only when the copy destination is HDD.

“Alarm” appears for “From Main” when “Alarm Recording Area” is set to other than “0 %.” (System Menu Memory Data Management Setting for Main Memory)

“LPA” appears for “From Main” when “Long Pre-Alarm Area” is set to other than “0 %.” (System Menu Memory

Data Management Setting for Main Memory)

When copying the data to DVD while “Overwrite” is set to “On,” the unit clears the existed data of the disc before overwriting with new data. Note that clearing the data takes about 30 to 40 minutes. You cannot cancel opera- tion during clearing the data of the DVD.

When copying the data while “Copy Data” is set to “Alarm,” the unit performs copy operation, however, the data is not copied if there is no alarm recording data within the speci- ﬁed range of copy. In case of CD/DVD disc, the remaining capacity becomes low because only the management information is recorded.

Do not use the disc which has been used on the personal computer, failed to be copied, or stopped during copying due to the power failure because they may cause mal- function of the unit.

step3. Select <Copy Data to Copy 2 Drive> and select “Start” or “Continue” and then select “Set.” Input the start time or select the bookmark of copy.

Start: Sets the start point of copy.

Continue: Starts copying from the end point of the previous copy.

•To set the start point using the bookmark, select “Bookmark” and then select the desired bookmark number.

•To copy from the oldest recording time, select “Copy Start Time.”

step4. Select “Execute.”

•The copy starts.

•To stop copy manually, select “Cancel” in the screen of <Copy Data to Copy 2 Drive>. The data which has been copied before cancelling is copied.

The warning is displayed when the copied range exceeds the available capacity of the device to be copied when “FIFO Overwrite” is set to “Off” and the copy destination is HDD. In this case, set the copy setting again with nar- rower copy range or use a copy device with larger capac- ity.

When the copy is performed during recording, the picture of the recording start and end points may not be record- ed.

When the recording data of the main device which is be- ing copied is about to be overwritten or has been over- written, copy is stopped. Be careful for the copy which requires long time such as overwriting copy of DVD.

The progress bar of copy is not displayed for copy 2.

The picture data is processed in 2 MB unit. Therefore the

data is copied in 2 MB unit from the start point of the des- ignated range when copying.

DX-TL4716U specifications

The Mitsumi electronic DX-TL4716U is a versatile and highly regarded electronic component that is primarily utilized in a range of industrial applications, particularly in automation and control systems. This device stands out due to its advanced capabilities and robust design, making it an essential component for modern electronic systems.

One of the main features of the DX-TL4716U is its highly efficient power management system. It is designed to operate seamlessly with various power supply configurations, ensuring that it can accommodate different operational environments. This adaptability makes it suitable for use in both consumer electronic products and high-demand industrial machinery.

The DX-TL4716U also supports multiple communication protocols, including I2C, SPI, and UART. This versatility allows the component to interface with a plethora of microcontrollers and other devices, optimizing integration into larger systems. The ease of communication it provides is essential for real-time data transfer and control, which is a significant requirement in fields such as robotics and telemetry.

Moreover, this component is equipped with features that enhance its reliability and efficiency. It comes with built-in protection mechanisms against over-voltage, over-current, and thermal overload. Such attributes ensure longevity and stability, critical for applications where downtime can result in significant losses.

The technology behind the DX-TL4716U incorporates advanced semiconductor materials, allowing for lower power consumption while maintaining high performance. This focus on efficiency is imperative in modern electronics, where energy conservation has become a priority. The device operates at a wide range of temperatures, making it suitable for applications in harsh environments.

In terms of physical characteristics, the DX-TL4716U is compact, enhancing its integration into various electronic layouts without requiring excessive space. This design consideration allows engineers to maximize the functionality of their systems without compromising on space.

In conclusion, the Mitsumi electronic DX-TL4716U exemplifies cutting-edge technology in the realm of electronic components. Its remarkable features, including versatile communication options, efficient power management, and robust protective mechanisms, position it as a key player in the fields of automation and control. As industries continue to evolve towards greater efficiency and reliability, the DX-TL4716U is well-equipped to meet these demands.