Daily operation
Adjusting the sound
Switching sound off/on
Sound off;
Sound on: Press button again or set volume V+.
Setting the volume
V+/V– volume louder / quieter.
The volume bar will be shown briefly if no other menu is displayed.
Setting the sound mode
Call Sound mode.
|
|
|
|
|
|
|
|
|
| Sound mode | ... |
|
|
|
|
|
|
| optimal |
| (5) | 4 | 3 | 2 | 1 |
|
34Select the number of speakers you want to hear.
Additional sound settings for volume adjustment and for Sound mode:
➠As long as you can still see the volume bar or the selection of speakers for sound mode:
5 Call additional sound settings.
|
|
|
|
|
|
| END | |
| Volume | Sound mode | DPLII mode | Sound adjustment | H | |||
| 24 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
34Select sound setting,
6Go to the menu line below.
34Make changes.
Sound settings via the TV menu
➠In normal TV mode, without other displays.
Call TV menu.
34Select Sound,
6 go to the menu line below.
34Select desired sound setting,
6Go to the menu line below.
34Make changes.
Explanations of the sound settings:
Sound mode Select the number of speakers you want to hear. The selection depends on the connected sound components (from page 39) and on the transmitted audio signal.
➠If the number of speakers appears in brackets, the sound of missing speakers is transmitted by the existing speakers (virtual).
optimal The momentarily reproduced audio signal is output with the ideal number of speakers.
1 Play centre sound or mono (left/right). 2 Play front sound (L/R stereo).
3 Play front and centre sound. 4 Play front and surround sound.
5 Play front, surround and centre sound.
➠You can also enter the number of speakers with the numeric buttons of the remote control.
Amplifier play via an external HiFi amplifier. Selection is only possible if an amplifier has been selected in the sound components wizard.
Sound Speech, Classical, Pop, Custom music, and Custom film adjustment sound.
Headphone vol. Adjust the headphones volume.
Loudness Proper boost of bass and treble tones at low volume.
DPLII mode Here you can make Dolby Pro Logic II sound settings for movie, music, matrix and personal settings. Menu item only appears when more than 2 speakers are selected in the sound mode.
more ... call with OK.
Sound Selection possibility Mono/Stereo or Sound 1 or Sound Speakers/ 2 for
Headphones headphones. Only available for analogue stations.
Auto Volume Reduces volume differences, e.g. for advertisements that are too loud.
AV output Sound selection for
Maximum Determining the maximum volume that can be set. volume
Switch on Specify the volume that is set when switching on the TV volume set with the mains switch. This does not affect switching
the set on from standby mode.
Volume The volume can differ according to the individual stations. adjustment for If the sound is too loud or too quiet in relation to other current station stations, adjust the volume. When the menu is open, you can select the stations one after another with P+/P– and
adjust every single station conveniently.
- 18