Explanations of important settings

Loewe Spheros R 32 HD+ Explanations of important settings, Manual station search, Exit TV menu

Operating additional equipment

Signal type	The signal type of the devices that can be connected can
	vary greatly. If you are not sure, leave the setting for Signal
	on Automamtic CVBS/YC (e.g. for DVD Player/Recorder) or
	Autom.-VHS/SVHS(e.g. video recorder), otherwise select
	the right signal type. See the glossary on page 56 for
	further information.
Immediate	If the picture from a connected device is to be displayed
playback	immediately on the TV set during playback, select yes. A
	switching voltage is allowed so that you do not have to
	switch over manually to see the picture of the connected
	device. (See the operating manual of the connected re-
	production device.)
	When playing from Digital Link Plus devices, the picture is
	always displayed immediately, regardless of the setting.
Assign digital	Select the AV socket to which the device of which you
audio input	want to hear the digital sound is connected. Connect the
	digital output of the external device to the digital input
	of the TV set (see page 45). If a device with digital audio
	is not connected then select no.

Connection possibilities for a DVD/video recorder

There are two possibilities for viewing the picture of the connected recorder:

1.Use appropriate cables in conjunction with the connections assigned by the connection wizard. This always offers the best quality and the greatest convenience, such as automatic switch over when playing from a connected device.

2.You are using the antenna connection between recorder and TV device. However this reduces the quality.

Connecting antenna to the DVD/video recorder

If you want to receive and record analogue stations, it is useful to loop the recorder into the antenna cable; as shown in the connection example on page 35 bottom right.

If the antenna connection is also used for the playback because the devicers are not connected by EURO-AV cables, you have to search for the recorder station and save it in the TV set.

Proceed as follows (see also the operating manual of the connected recorder):

➠Insert a DVD/cassette and press play.

Call AV selection.

34Select VIDEO, OK to switch over.

If no picture is visible on the TV screen during recorder playback, you have to search for the station or set it manually.

To avoid finding "normal" television stations when search- ing for stations, unplug the antenna plug on the record- er's antenna input temporarily (the cable for the antenna system).

Manual station search:

➠VIDEO is selected by the AV selection.

Call TV menu.

34Select Settings,

6 go to the menu line below.

34Select Stations,

6go to the menu line below.

34Select Manual adjustment, OK to call other settings.

For Channel enter "E30". Blue button: Start search.

When you have found the recorder station: Red button: Overwrite station slot.

Exit TV menu.

Re-connect the antenna plug that you temporarily unplugged.

If disturbances should now occur because a TV station is being broadcast on the same channel as the station of the recorder, then you must change the transmission channel on the recorder and scan for the recorder again on the TV set.

- 36

Operating additional equipment