Panasonic AG-2570 To Cancel Auto Tuning Mid- Operation, To Restart Plug in Auto Tuning, Channel

Page 13

3Select a program number on the TV which you wish to use as the video viewing channel. Then tune in the TV to the picture from the screen being auto tuned or the screen selected with the I and J buttons of the VCR.

–During Auto Tuning, the TV program screen does not appear, and the Auto Tuning screen appears instead.

 

 

2

AUTO CHANNEL SET

AUTO TUNING IS

 

 

COMPLETED.

PROCEEDING

 

END

: MENU

END: MENU

To Cancel Auto Tuning Mid- Operation

Press [MENU] during Auto Tuning. Auto Tuning is cancelled.

To Restart Plug in Auto Tuning

1Press [EJECT] and remove the video cassette.

2Keep the I and J buttons on the VCR pressed simultaneously for 3 seconds or more during the VCR on.

–The channel displayed on the VCR display disappears for a moment then changes to 2.

Disappears 2

3Disconnect the mains lead and then reconnect it.

4Turn off the VCR and then turn it on. Press [VCR/TV] to select the VCR mode.

– Auto Tuning commences.

If Auto Tuning stops halfway by turning the VCR off, playback or a power failure:

1 Disconnect the mains lead and then

reconnect it.

 

2 Turn off the VCR and then turn it on.

 

 

– Auto Tuning commences.

 

To Change the RF Output

Up

Setting

Channel

 

In some rare cases after tuning the TV to your

 

VCR, interference may be visible on the

 

picture. To get rid of this interference, you can

 

manually adjust the RF output channel a few

 

channels up and down from the current setting.

 

The procedure is described below.

 

1Hold down [MENU] for 5 seconds or more.

–The VCR display changes as shown below and the VCR picture on the TV displays this pattern.

Panasonic VCR

END: MENU

2Enter the desired channel number (US3 or US4) by the I and J buttons.

3()4

3Press [MENU] to finish the setting mode.

4Retune your TV to the new RF channel for the VCR.

Note:

–Even if the RF output channel has been changed, it is not necessary to perform Auto Tuning.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operating Instructions Plug in Auto Tuning Contents To mains supply Controls and Connection SocketsVideo in AV1 ‘ FrontInfrared Transmitter Infrared Remote ControllerBefore Use Volume sNr13 TV Í 14 AVPower Source for the Remote Controller Remote Controller SetupPrecautions for Battery Replacement Connections Setting UpAntenna Not supplied Stereo AmplifierConnection to a TV using the Audio/Video Input Sockets Cable Connection With the cable converter. Timer-controlledPlug in Auto Tuning Tuning the TV to your VCRPress VCR/TV to select the VCR mode Channel being SearchedTo Restart Plug in Auto Tuning To Cancel Auto Tuning Mid- OperationPress Menu during Auto Tuning. Auto Tuning is cancelled To Change the RF OutputPreparations Storing TV Broadcasts in your VCROperations Press Menu Select Channel SETChannel Plan Manual System Setting ProcedureTo Select the Desired Language Language Setting of the On Screen DisplaySetting Setting the Clock of your VCRTime Reset Function To Use the On Screen Display Settings Using the On Screen DisplayOn Screen Display Display the Approximate Remaining Tape Time To Select the Corresponding Video Cassette Tape Length toFor the Blue Background Function To Select the Jet Search Speed in the EP modeFor the Jet Navigator Function Select DeleteAuto Bilingual Choice Function Audio Channel SelectionView a still picture by PlaybackInsert a recorded video Cassette tape View a slow motion pictureOther Playback Functions To Stop Playback Automatically Playback Off Timer FunctionOperations To Locate Precisely the Desired Moment in a SceneTo Eject the Video Cassette Using the Remote Controller To Playback in the Desired Picture Quality Picture ModeMode Characteristic Example for To Play back the Recorded Part RepeatedlyManual Recording To Interrupt Recording To Select the Desired Tape SpeedTo View One TV Program while Recording Another One To Display the Approximate Remaining Tape TimeBasic Operations One-Touch Recording OTRPreparation Key Programming Timer RecordingExample Advanced Operations Cancelling a Timer Program Checking a Timer ProgramSearch Functions To cancel the Jet Navigator list Press MenuJet Navigator Category Indication Icon To Set the CategoryTo Check the Recorded Programming Data Time Stamp Function When Recording Over the Same Location on a TapeTo Demonstrate the Jet Navigator Function To stop the operation at any time Recording Index SignalsPress Stop Editing Assembly EditingRecording VCR Other VCR Video movie cameraOther Automatic Functions Other FunctionsSelf-diagnostic Indications Before Requesting ServiceHelpful Hints Message of On Screen DisplayRemote controller will not operate Correctly Symptom description is indicated in bracketsPlayback will not operate correctly Recording will not operate correctlyAvoid Sudden Changes in Temperature Usage PrecautionsHelpful Humidity and DustDirt on the video heads CVC Crystal View Control IndicatorSurge Absorber Longrun Head SystemSpecifications Page Page Southeast Region Executive OfficeCentral Region Government Marketing Department

AG-2570 specifications

The Panasonic AG-2570 is a professional-grade videomaker renowned for its reliable performance and versatile features. Designed for video production, this deck primarily targets broadcasters and independent filmmakers, providing them with a robust tool that can significantly enhance their workflow.

One of the main features of the AG-2570 is its ability to handle various formats, including both NTSC and PAL. This dual-format capability allows users to work seamlessly with different video standards, making it highly flexible for international projects or collaborations. The AG-2570 also supports S-VHS and VHS playback, ensuring compatibility with a broad range of tape formats.

The AG-2570 is equipped with advanced recording and playback technologies that enhance video quality. The Digital Noise Reduction (DNR) feature is notable, as it helps to minimize artifacts and ensures cleaner, crisper images. Additionally, the deck utilizes a high-quality playback head design to improve the signal-to-noise ratio, which contributes to superior video fidelity.

User interface plays a significant role in professional equipment, and the AG-2570 excels in this area with its easy-to-use control panel. It features straightforward buttons and a clear LCD display, allowing operators to navigate settings quickly and efficiently, thereby streamlining the video production process.

For connectivity, the AG-2570 offers various input and output options, including component and composite video outputs, ensuring it can easily integrate with existing video production setups. The deck's ability to chain multiple devices via RS-422 remote control also adds to its versatility, allowing for synchronization with other equipment in a studio environment.

In terms of construction, the AG-2570 is built to endure the demands of professional use. Its robust design ensures longevity, and the quality of materials used in manufacturing provides reliability during extended usage.

Overall, the Panasonic AG-2570 is a well-rounded video deck that incorporates professional features, advanced technologies, and solid build quality. It is an excellent choice for those seeking to elevate their video production capabilities, whether for studio work, field production, or archival purposes. With its superior playback quality, versatility in format handling, and user-friendly interface, the AG-2570 remains a popular choice in the industry for high-quality video capture and playback.
Top Page Image Contents