Panasonic AG-2570 Usage Precautions, Helpful, Avoid Sudden Changes in Temperature

Page 39

Usage Precautions

Please read these precautions before you

operate this VCR.

Avoid Sudden Changes in Temperature

If the VCR is suddenly moved from a cold to a warm place, dew may form on the tape and inside the VCR.

Humidity and Dust

Avoid places where there is high humidity or much dust, which may cause damage to internal parts.

Do Not Obstruct the Ventilation Holes

The ventilation holes prevent abnormal increases in temperature. Do not block or cover these holes. Avoid covering the holes with soft materials such as cloth or paper.

Avoid High Temperature

Keep the VCR away from extreme heat sources such as direct sunlight, heating radiators, or closed automobiles.

Avoid Magnets or Magnetized objects

Never bring a magnet or magnetized object near the VCR as it will adversely affect its performance of the VCR.

Keep the VCR away from other equipments as much as possible when using it, to avoid any adverse effect on performance for both the VCR and the equipment.

Avoid Water

Keep the VCR away from flower vases, tubs, sinks, etc. If liquids are spilled into the VCR, serious damage could occur. If you spill any liquid into the VCR, consult qualified service personnel.

Lightning

To avoid damage by lightning, disconnect the aerial plug from the VCR.

Cleaning the VCR

Wipe the VCR with a clean, dry cloth. Never use cleaning fluid or other chemicals. Do not use compressed air to remove any dust.

Stacking

Place the VCR in a horizontal position, and do not place anything heavy on it.

If Dew Forms in the VCR

Dew may form in the VCR if:

–The VCR is in a room where the heater has just been turned on.

–The VCR is in a room with steam or high humidity.

–The VCR is brought from cold surroundings into a well-heated room.

–The VCR is suddenly brought from cool surroundings, such as an air-conditioned room or car, to a place which is hot and humid.

Hints

Do Not Place Fingers or Other Objects Inside

Do not attempt to disassemble the VCR. Touching internal parts of this VCR is dangerous, and may cause it serious damage. There are no user serviceable parts inside.

Note:

–Do not operate the VCR for at least 1 hour if any of the above conditions occur.

This VCR does not incorporate a dew sensor.

Helpful

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Operating Instructions Plug in Auto Tuning Contents To mains supply Controls and Connection SocketsVideo in AV1 ‘ FrontInfrared Transmitter Infrared Remote Controller14 AV Volume sNrBefore Use 13 TV ÍRemote Controller Setup Power Source for the Remote ControllerPrecautions for Battery Replacement Stereo Amplifier Setting UpConnections Antenna Not suppliedConnection to a TV using the Audio/Video Input Sockets Cable Connection With the cable converter. Timer-controlledChannel being Searched Tuning the TV to your VCRPlug in Auto Tuning Press VCR/TV to select the VCR modeTo Change the RF Output To Cancel Auto Tuning Mid- OperationTo Restart Plug in Auto Tuning Press Menu during Auto Tuning. Auto Tuning is cancelledSelect Channel SET Storing TV Broadcasts in your VCRPreparations Operations Press MenuChannel Plan Manual System Setting ProcedureTo Select the Desired Language Language Setting of the On Screen DisplaySetting the Clock of your VCR SettingTime Reset Function Settings Using the On Screen Display To Use the On Screen DisplayOn Screen Display Display the Approximate Remaining Tape Time To Select the Corresponding Video Cassette Tape Length toSelect Delete To Select the Jet Search Speed in the EP modeFor the Blue Background Function For the Jet Navigator FunctionAuto Bilingual Choice Function Audio Channel SelectionView a slow motion picture PlaybackView a still picture by Insert a recorded video Cassette tapeTo Locate Precisely the Desired Moment in a Scene To Stop Playback Automatically Playback Off Timer FunctionOther Playback Functions OperationsTo Play back the Recorded Part Repeatedly To Playback in the Desired Picture Quality Picture ModeTo Eject the Video Cassette Using the Remote Controller Mode Characteristic Example forManual Recording To Display the Approximate Remaining Tape Time To Select the Desired Tape SpeedTo Interrupt Recording To View One TV Program while Recording Another OneOne-Touch Recording OTR Basic OperationsPreparation Timer Recording Key ProgrammingExample Advanced Operations Cancelling a Timer Program Checking a Timer ProgramTo cancel the Jet Navigator list Press Menu Search FunctionsJet Navigator Category Indication Icon To Set the CategoryWhen Recording Over the Same Location on a Tape To Check the Recorded Programming Data Time Stamp FunctionTo Demonstrate the Jet Navigator Function Recording Index Signals To stop the operation at any timePress Stop Other VCR Video movie camera Assembly EditingEditing Recording VCROther Automatic Functions Other FunctionsMessage of On Screen Display Before Requesting ServiceSelf-diagnostic Indications Helpful HintsRecording will not operate correctly Symptom description is indicated in bracketsRemote controller will not operate Correctly Playback will not operate correctlyHumidity and Dust Usage PrecautionsAvoid Sudden Changes in Temperature HelpfulLongrun Head System CVC Crystal View Control IndicatorDirt on the video heads Surge AbsorberSpecifications Page Page Government Marketing Department Executive OfficeSoutheast Region Central Region

AG-2570 specifications

The Panasonic AG-2570 is a professional-grade videomaker renowned for its reliable performance and versatile features. Designed for video production, this deck primarily targets broadcasters and independent filmmakers, providing them with a robust tool that can significantly enhance their workflow.

One of the main features of the AG-2570 is its ability to handle various formats, including both NTSC and PAL. This dual-format capability allows users to work seamlessly with different video standards, making it highly flexible for international projects or collaborations. The AG-2570 also supports S-VHS and VHS playback, ensuring compatibility with a broad range of tape formats.

The AG-2570 is equipped with advanced recording and playback technologies that enhance video quality. The Digital Noise Reduction (DNR) feature is notable, as it helps to minimize artifacts and ensures cleaner, crisper images. Additionally, the deck utilizes a high-quality playback head design to improve the signal-to-noise ratio, which contributes to superior video fidelity.

User interface plays a significant role in professional equipment, and the AG-2570 excels in this area with its easy-to-use control panel. It features straightforward buttons and a clear LCD display, allowing operators to navigate settings quickly and efficiently, thereby streamlining the video production process.

For connectivity, the AG-2570 offers various input and output options, including component and composite video outputs, ensuring it can easily integrate with existing video production setups. The deck's ability to chain multiple devices via RS-422 remote control also adds to its versatility, allowing for synchronization with other equipment in a studio environment.

In terms of construction, the AG-2570 is built to endure the demands of professional use. Its robust design ensures longevity, and the quality of materials used in manufacturing provides reliability during extended usage.

Overall, the Panasonic AG-2570 is a well-rounded video deck that incorporates professional features, advanced technologies, and solid build quality. It is an excellent choice for those seeking to elevate their video production capabilities, whether for studio work, field production, or archival purposes. With its superior playback quality, versatility in format handling, and user-friendly interface, the AG-2570 remains a popular choice in the industry for high-quality video capture and playback.
Top Page Image Contents