Panasonic AG-2570 Playback will not operate correctly, Recording will not operate correctly

Page 38

Playback will not operate correctly

The symptom description is indicated in brackets [ ].

[The picture is noisy or is not in color. Horizontal bars or lines run down the screen.]

Tracking is not correct.

Adjust the tracking. See page 36.

The TV has not been tuned to the VCR. Tune the TV to the VCR. See page 12.

The video heads are clogged or worn. Consult your dealer for further advice.

Recording will not operate correctly

The symptom description is indicated in brackets [ ].

[The 1 indication flashes whenever recording is attempted.]

The erasure prevention tab on the video cassette has been broken off.

Use a tape with an intact erasure prevention tab, or cover the tab hole with adhesive tape, if the original recording is no longer required.

[The picture is recorded with noise or a blank screen.]

The antenna or antenna cable is defective.

Check the antenna connection to the VCR. See pages 9–10.

Check your normal TV picture. If there is no picture, check your antenna.

The VCR is not correctly tuned. Retune the VCR. See pages 12–15.

AV input has been selected. Select the required TV program.

[Timer recording cannot be performed.]

The clock or calendar has been incorrectly set.

Check the clock and calendar. Set them to the present time. (Note that this is a 24-hour clock.) See page 17.

The recording starting or ending time setting is incorrect.

Set the recording starting and ending time correctly.

The VCR has not been set for timer recording.

Press [TIMER (TIMER REC)] after programming for timer recording.

[AV external recordings cannot be made.]

AV input has not been selected. Select AV input by pressing [INPUT SELECT].

External AV connections are incorrect. Check that the connections for external video and audio sources are correct.

See page 35.

The remote controller will not operate

correctly

The symptom description is indicated in brackets [ ].

[The remote controller does not operate correctly.]

The remote controller transmitter beam is not reaching the VCR.

Ensure that the remote controller is being pointed at the VCR and that the transmitter beam is not obstructed.

The distance is too far.

Use the remote controller within 7 m of the VCR.

If this range is not possible, replace the batterries.

The batteries are exhausted. Replace the batteries. Note the precautions for replacement on page 8.

The batteries are incorrectly fitted with (+/-) reversed.

Fit the batteries correctly as shown on page 8.

38

Image 38
Contents Operating Instructions Plug in Auto Tuning Contents Controls and Connection Sockets To mains supplyFront Video in AV1 ‘Infrared Remote Controller Infrared Transmitter13 TV Í Volume sNrBefore Use 14 AVPrecautions for Battery Replacement Remote Controller SetupPower Source for the Remote Controller Antenna Not supplied Setting UpConnections Stereo AmplifierConnection to a TV using the Audio/Video Input Sockets With the cable converter. Timer-controlled Cable ConnectionPress VCR/TV to select the VCR mode Tuning the TV to your VCRPlug in Auto Tuning Channel being SearchedPress Menu during Auto Tuning. Auto Tuning is cancelled To Cancel Auto Tuning Mid- OperationTo Restart Plug in Auto Tuning To Change the RF OutputOperations Press Menu Storing TV Broadcasts in your VCRPreparations Select Channel SETManual System Setting Procedure Channel PlanLanguage Setting of the On Screen Display To Select the Desired LanguageTime Reset Function Setting the Clock of your VCRSetting On Screen Display Settings Using the On Screen DisplayTo Use the On Screen Display To Select the Corresponding Video Cassette Tape Length to Display the Approximate Remaining Tape TimeFor the Jet Navigator Function To Select the Jet Search Speed in the EP modeFor the Blue Background Function Select DeleteAudio Channel Selection Auto Bilingual Choice FunctionInsert a recorded video Cassette tape PlaybackView a still picture by View a slow motion pictureOperations To Stop Playback Automatically Playback Off Timer FunctionOther Playback Functions To Locate Precisely the Desired Moment in a SceneMode Characteristic Example for To Playback in the Desired Picture Quality Picture ModeTo Eject the Video Cassette Using the Remote Controller To Play back the Recorded Part RepeatedlyManual Recording To View One TV Program while Recording Another One To Select the Desired Tape SpeedTo Interrupt Recording To Display the Approximate Remaining Tape TimePreparation One-Touch Recording OTRBasic Operations Example Timer RecordingKey Programming Advanced Operations Checking a Timer Program Cancelling a Timer ProgramJet Navigator To cancel the Jet Navigator list Press MenuSearch Functions To Set the Category Category Indication IconTo Demonstrate the Jet Navigator Function When Recording Over the Same Location on a TapeTo Check the Recorded Programming Data Time Stamp Function Press Stop Recording Index SignalsTo stop the operation at any time Recording VCR Assembly EditingEditing Other VCR Video movie cameraOther Functions Other Automatic FunctionsHelpful Hints Before Requesting ServiceSelf-diagnostic Indications Message of On Screen DisplayPlayback will not operate correctly Symptom description is indicated in bracketsRemote controller will not operate Correctly Recording will not operate correctlyHelpful Usage PrecautionsAvoid Sudden Changes in Temperature Humidity and DustSurge Absorber CVC Crystal View Control IndicatorDirt on the video heads Longrun Head SystemSpecifications Page Page Central Region Executive OfficeSoutheast Region Government Marketing Department

AG-2570 specifications

The Panasonic AG-2570 is a professional-grade videomaker renowned for its reliable performance and versatile features. Designed for video production, this deck primarily targets broadcasters and independent filmmakers, providing them with a robust tool that can significantly enhance their workflow.

One of the main features of the AG-2570 is its ability to handle various formats, including both NTSC and PAL. This dual-format capability allows users to work seamlessly with different video standards, making it highly flexible for international projects or collaborations. The AG-2570 also supports S-VHS and VHS playback, ensuring compatibility with a broad range of tape formats.

The AG-2570 is equipped with advanced recording and playback technologies that enhance video quality. The Digital Noise Reduction (DNR) feature is notable, as it helps to minimize artifacts and ensures cleaner, crisper images. Additionally, the deck utilizes a high-quality playback head design to improve the signal-to-noise ratio, which contributes to superior video fidelity.

User interface plays a significant role in professional equipment, and the AG-2570 excels in this area with its easy-to-use control panel. It features straightforward buttons and a clear LCD display, allowing operators to navigate settings quickly and efficiently, thereby streamlining the video production process.

For connectivity, the AG-2570 offers various input and output options, including component and composite video outputs, ensuring it can easily integrate with existing video production setups. The deck's ability to chain multiple devices via RS-422 remote control also adds to its versatility, allowing for synchronization with other equipment in a studio environment.

In terms of construction, the AG-2570 is built to endure the demands of professional use. Its robust design ensures longevity, and the quality of materials used in manufacturing provides reliability during extended usage.

Overall, the Panasonic AG-2570 is a well-rounded video deck that incorporates professional features, advanced technologies, and solid build quality. It is an excellent choice for those seeking to elevate their video production capabilities, whether for studio work, field production, or archival purposes. With its superior playback quality, versatility in format handling, and user-friendly interface, the AG-2570 remains a popular choice in the industry for high-quality video capture and playback.