Panasonic PV-V4525S VHS Hi-Fi Stereo System, Audio Mode for Recording, Audio Mode for Playback

VHS Hi-Fi Stereo System

Audio Mode for Recording

1Press SAP/ Hi-Fito display audio mode. (Display disappears after 5 seconds.)

2	Press SAP/ Hi-Fi repeatedly
	to select desired mode.
STEREO
SAP	• Refer to “Receivable
MONO
	Broadcast Types” on page 4.

• Arrow indicates selection.

3Make a recording.

See p. 5 of “Basic Operations” Instruction book.

Audio Mode for Playback

1Start playback.

See p. 5 of “Basic Operations” Instruction book.

2Press SAP/ Hi-Fito display audio mode. (Display disappears after 5 seconds.)

3	Press SAP/ Hi-Fi repeatedly
	to select desired mode.
H I F I : L/R
H I F I : L	• Select “HIFI(L/R)” or “HIFI(L)”
H I F I : R
NORMAL	or “HIFI(R)” to listen to stereo
	recordings in stereo sound.
	Select “NORMAL” for
• Arrow indicates	monaural sound.
selection.

Notes

•Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound.

•To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an external stereo amp and speakers. (See page 4.)

•If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

•Hi-Fi and normal audio playback volume level may differ.

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

- 5 -

• MTS Broadcast • VHS Hi-Fi Stereo System