Location of Controls/ Reset All VCR Memory Functions
Multi Function Display (FRONT DISPLAY)
Power Indicator
Lights up when power is on.
Timer Indicator
Lights up when the VCR is set for a Timer Recording, or when One Touch Recording (OTR) is used.
Flashes when a Timer Recording is set, but a tape has not been inserted into the VCR.
Clock/ Status/ Channel/ Speed Display Displays current time. Briefly displays VCR status when you press a function button, channel number or “L1” or “L2” when you select channel or line input, and recording speed when you press SPEED.
Rear View of the VCR
AC Power Plug
While plugged into an AC outlet, the VCR consumes 0.9 W of electrical power in off condition.
Video Input | Video Output |
Connector | Connector |
• | • |
Audio Input | Audio Output |
Connector (L/R) | Connector (L/R) |
VHF/UHF Antenna Input Terminal
VHF/UHF Antenna Output Terminal
Reset All VCR Memory Functions
Returns to factory setting. Use if relocating VCR, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the VCR.
1 Turn VCR Power on.
|
| Press and hold both PLAY and CHANNEL | |
|
| 2 on the VCR for more than 5 seconds. | |
|
| • The power shuts off. | |
1 | 2 | Perform “Initial Setup (Ready to Play)” on | |
3 page 4. | |||
|
|
Note to CABLE system installer
This reminder is provided to call the CABLE system installer’s attention to Article
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
P
Printed in Indonesia LSQT0864 A
- 8 -