Warning and Important
Information
As this equipment gets hot during use, operate it in a well ventilated place; do not install this equipment in a confined space such as a book case or similar unit.
WARNING:
To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment.
Important
Your attention is drawn to the fact that the recording of
For your safety
Do not remove outer cover.
Touching internal parts of the VCR is dangerous, and may seriously damage it.
To prevent electric shock, do not remove cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.
Inserting Remote Control Batteries
Insert the batteries with the polarity (+ and
-
+- 
+
Notes:
The service life of the batteries is approximately 1 year. However, it varies considerably depending on the frequency of use.
–When they are exhausted, replace them with two AA, UM3, or R6 size batteries.
–When the batteries are exhausted, remove them immediately and dispose of them correctly.
–Make sure that the batteries are inserted with the polarity (+ and
–Do not mix old battery with new battery.
–Do not mix different battery types, i.e. Alkaline and Manganese.
–Do not use rechargeable
–Do not heat or
–When you do not use the remote control for a long time, take out the batteries and store them in a cool, dry place.
Longrun Head System
This longrun head system enables approximately 8,000 hours of recording/playback with high quality images.
Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects heads from dust and prevents head clogging.
Plus, [Alumina] Head Cleaner further enhanced cleaning efficiency.
–Based on
Cautions before you operate this VCR
Avoid:
–Humidity and dust.
–Covering the ventilation holes with soft materials such as cloth or paper.
–Extreme heat such as direct sunlight.
–Magnets or electromagnetic objects.
–Touching internal parts of the VCR.
–Water or some other liquid.
–Lightning. (Disconnect the aerial plug from the VCR during lightning storms.)
–Anything heavy on the VCR.
–Connecting or handling the equipment with wet hands.
–Using a cell phone near the VCR because doing so may cause noise to adversely affect the picture and sound.
Do:
–Wipe the VCR with a clean and dry cloth.
–Install the VCR in a horizontal position.
–Keep the VCR, TV and other equipment switched off until you have finished all connections.
Condensation may form in the following cases:
–The VCR is brought from cold surroundings into a
–The VCR is suddenly brought from cool surroundings, such as an
Note:
–In any of the
This VCR is not equipped with a dew sensor.
Press the POWER button 1 to switch the VCR from on the standby mode or vice versa. In the standby mode, the VCR is still connected to the mains.
Plug in Auto Tuning
| Setting image illustration | |
Aerial |
| |
1 | Connect the | 2 Connect the |
| aerial cable. | mains lead. |
|
| 3 Press the POWER |
|
| button 1. |
On Screen Display
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 22 SEARCH | 21 |
END: MENU
Plug in Auto Tuning is completed.
All broadcasting stations that can be received in the area are automatically tuned and stored in memory.
–Do not turn off the VCR halfway. (See page 7.)
2