Panasonic AJ-SD930, AJ-SD955A manual Display panel

Parts and their functions

Display panel

		1									2									3			45			6		7
																								SCH		SERVO
525		625										REMOTE							VIDEO			AUDIO
dB			dB			dB			dB										Y PB PR			ANALOG				=			INH
0		0				0			0					CUE					CMPST			AES/EBU					EDIT REC
-4		-4				-4			-4				dB						SDI		USER SET			DVCPRO
-8		-8				-8			-8		-8											SDI
																									50
-12		-12				-12			-12		-12							SDTI/1394			SDTI/1394
																								DVCAM
																			SG 1 2			SG
-16		-16				-16			-16		-16
-20		-20				-20			-20		-20
-25		-25				-25			-25		-25					CTL
-30		-30				-30			-30		-30
																		TC
-		-				-			-		-
																	UB
	L	R		L	R		L	R		L		R		L	R

1TV system displays

The selected TV system is displayed here.

With the AJ-SD955A, it is possible to switch between the 525 interlace and 625 interlace systems by setting setup menu item No. 070 (TV SYSTEM).

With the AJ-SD930, only the 525 interlace TV system can be used.

525 : This lights when the 525 interlaced TV system has been selected.

625 : This lights when the 625 interlaced TV system is selected. SD955A

2REMOTE lamp

This lamp lights when the CONTROL switch has been set to the REMOTE position.

3INPUT SELECT display area

The characters corresponding to the selected input signals light. With all input signals except for analog audio signals, the fact that no signals have been

selected is indicated by a flashing display.

VIDEO
Y PB PR	: Analog component video signals
	(option)
CMPST	: Analog composite video signals
	(option)
SDI	: Serial digital video signals
SDTI/1394	: Compressed digital signals (option)
SG/SG 1/SG 2: Internal reference signals
AUDIO
ANALOG	: Analog audio signals
AES/EBU	: Digital audio signals
USER SET	: Recording audio signal selection
SDI	: Serial digital audio signals
SDTI/1394	: Compressed digital signals (option)
SG	: Internal reference signals

4= lamp

This lamp lights when a cassette tape is inserted into the VTR.

5SCH lamp

This lamp lights when the SCH phase of the external synchronized signal (REF VIDEO) is inside the prescribed range.

At all other times, the lamp is off.

6SERVO lamp

This lamp lights when the drum servo or capstan servo locks.

7Channel condition lamps

These lamps light to indicate the error rate status. (green 5 white 5 red)

Green: This lights when the error rates for the video and audio playback signals are both at acceptable levels.

White : This lights when the error rate for the video or audio playback level has increased.

The playback picture and sound remain unaffected even while this lamp is lighted.

Red : This lights when the error rate for the video or audio playback level has increased to the extent that correction or interpolation was performed.

11