Recording

LSQT0879.book 10 ページ２００５年１月２６日水曜日午後６時１７分

Preparations

•Confirm that the VCR is on.

•Confirm that the TV is on and the VCR viewing channel is selected.

Operations

1Insert a video cassette with an intact erasure prevention tab.

•If it has already been inserted, press [VCR-ON/OFF] (1) to turn the VCR on.

2Select the TV station

using [CH] (20).

• It is also possible to select by pressing [Numeric]

(3).

3	Press [REC] (15) ([REC/ SP
	OTR] (37)) to start
	recording.
4	Press [STOP] (12) to stop recording.

To Select the Desired Rec Mode

Press [REC MODE] (33) before recording.

• SP provides standard recording time, optimum LP picture and sound quality.

LP provides double recording time with slightly reduced picture and sound quality.

EP provides triple recording time with slightly reduced picture and sound quality.

When you play back a tape recorded in the EP mode, the monaural sound may be unstable.

When you start the recording in the EP mode, [EP] indication on the VCR display flashes for about 8 seconds.

EP mode means Super Long Play (SLP).

	To Pause Recording
	Press [PAUSE/SLOW] (29)
	during recording.	SP
	Press it again to continue	SP
	Press it again to continue

To Display the Approximate Remaining Tape Time

The remaining tape time can be displayed in the VCR display.

1Select [TAPE SELECT] from the On Screen Display and select the corresponding video cassette tape length. See page 8.

2Press [STATUS/ NAVI CHECK] (32) repeatedly until the Remaining Tape Time appears on the VCR display.

REMAIN

For certain cassettes, the remaining tape time may not be displayed correctly.

To reset the tape counter

Press [RESET] (31) to reset the tape counter (elapsed time) to [0:00].

•The tape counter is automatically reset to [0:00] when a video cassette is inserted.

•The tape counter is reset to [0:00] when you operate the Jet Rewind function and the tape is rewound to the beginning.

Notes:

•When playing back a cassette recorded in the LP or EP mode, some pictures and sound distortion may occur. However, this is not a malfunction.

•The recording pause mode will be automatically cancelled after 5 minutes and return to the stop mode.

•The tape recorded in the EP mode on this VCR cannot be played back on the other VCR without EP mode function.

•On the other VCR (even with EP mode function), when you play back the tape recorded in the EP mode, the picture and the sound may be distorted. However, this is not a malfunction.

To Record the Present Date and Time (OSD Recording) on the same screen as the picture

This function allows you to record the present date and time on the same screen as the picture being recorded.

recording.

To View One TV Programme while Recording Another TV Programme

After pressing [REC] (15) to start recording, select on your TV the programme position of the TV programme that you want to view.

To Prevent Accidental Erasure of

Operations

1Set [OSD REC] to [ON]. (See page 8.)

2Press [REC] (15) ([REC/OTR]

(37)).

3Press [STOP] (12) to stop recording.

Note:

2 0 : 1 5 . 5 4

1 6 . O C T . 2 0 0 5

Recorded Contents

Break out the erasure prevention tab after recording. If you insert a video cassette with a broken out erasure prevention tab and press [REC] (15) ([REC/OTR] (37)), the indication flashes on the VCR display to indicate that recording is not possible.

To record this video cassette again, cover the tab hole with two layers of adhesive tape.

•This function is also activated for OTR recording and Timer recording.

LSQT0879