To delete an I-Timer Programme

LSQT0879.book 13 ページ２００５年１月２６日水曜日午後６時１７分

Programming a Timer Recording of a TV Programme Until its End

(Rec Mode Auto Change Function)

If the VCR determines that the remaining tape time is insufficient to record the programme to its end during a timer recording performed in the SP mode, this function automatically changes the Rec Mode to ensure that the whole programme will be recorded.

The Rec Mode will change as follows:

PAL system:	SP # LP
NTSC system:	SP # EP

•This function cannot change the recording mode to the EP mode for PAL system.

Depending on the remaining tape length, recording may be performed in the LP (EP) mode from the start. However, if the remaining tape time is still not sufficient in this case, the programme cannot be recorded to the end.

The tape length must be set correctly. (See page 8.) Some tapes may not work correctly.

If the recording mode changes from SP to LP during a timer recording, some brief picture distortion occurs at that point.

To Activate the Rec Mode Auto Change Function:

Press [REC MODE] (33) to select [A].

	EASY PROGRAMMING
• Every time you press [REC MODE]	1. DATE	29WE	SELECT
	2. CH	2		SET
	2. CH	2		SET
	3. ON TIME	20:02
(33), the indication changes in the	3. ON TIME	20:02
	4. OFF TIME	21:30
	5. REC MODE	A
following order:	6. CATEGORY		TIMER
following order:			TIMER

7. PUSH TIMER

# # # #END : MENU

SP LP EP A SP

Timer recording for the same programme on the next week (Intelligent Timer)

When you wish to set the timer recording for programmes which will be recorded within 1 week and you have ever recorded the programmes before, you can record them soon with I-TIMER function without entering day and time by buttons. Select the desired setting from the list of timer programme recorded before. Please check the date and time carefully.

Preparations

•The VCR must be turned on, or in timer recording standby mode.

•Confirm that the TV is on and the VCR viewing channel is selected.

•Insert a video cassette with an intact erasure prevention tab.

1Press [I-TIMER] (23) to display the menu for Intelligent Timer on the TV screen.

•The list of the timer programmes which are recorded before appears.

2Press [43] (28) to select the

timer programme which you want	DAY	CH		ON	OFF
timer programme which you want	SU	4	19:10		19:55		EP
to record on the next week.	SU	14	15:00		16:00		SP
	SU	25	10:30		11:00		A
	SA	2	20:02		21:30		SP
	SA	2	20:02		21:30		SP
	FR	2	20:02		21:30		SP
	WE	5	22:15		23:30		EP

3 Press [ENTER] (26).				ENTER		END : MENU
3 Press [ENTER] (26).
• The Timer Programme List screen	DATE	CH ON				OFF
• The Timer Programme List screen	15SA		2	10:30		11:00		SP
appears.	15SA	25		20:02		21:30		SP
appears.	16SU	25		10:30		11:00		A
				:		:
4 Press [TIMER (REC)] (14) to				:		:
4 Press [TIMER (REC)] (14) to				:		:
				:		:
switch the VCR over to the timer				:		:
switch the VCR over to the timer
recording standby mode.				SET : END : MENU
recording standby mode.

1Press [I-TIMER] (23) then press [34] (28) to select the timer programme which you want to delete.

2Press [CANCEL] (5).

• The timer programme is deleted, they cannot be restored.

Notes:

•Up to 16 I-Timer Programmes can be memorized.

•When I-Timer Programmes are increased to more than 16, the oldest one is deleted.

To check and cancel a Timer Programme

Preparations

•The VCR must be turned on, or in timer recording standby mode.

•Confirm that the TV is on and the VCR viewing channel is selected.

1Press [CHECK] (24).

•The Timer Programme List screen appears.

2Press [CHECK] (24) repeatedly to select the program.

•Every time you press [CHECK]

(24), the cursor shifts below.	DATE	CH		ON	OFF
(24), the cursor shifts below.	SU-SA 25			10:30	11:00	A
	SU	14		15:00	16:00	SP
• Press [1] (28) to display the	19WE	5		22:15	23:30	EP
• Press [1] (28) to display the	23SA	2		20:02	21:30	SP
category. (When [JET	28FR	AV		18:02	19:30	SP
category. (When [JET	30SU	4		19:10	19:55	EP
NAVIGATOR] is set to [ON].)				:	:
NAVIGATOR] is set to [ON].)				:	:
				:	:
Press [1] (28) again to make the			SET : END : MENU
Press [1] (28) again to make the
previous display appear.

3Press [CANCEL] (5) to cancel.

4Press [MENU] (9) to exit the On Screen Display.

Note:

•If timer recording is not completed (due to insufficient tape or cancellation by the user), the programmed timer recording data will be cancelled from the memory by 4 A.M two days later.

However, if the timer recording function is activated at that time, the programmed timer recording data will not be cancelled.

LSQT0879