Setting the Clock of Your VCR

LSQT0879.book 6 ページ２００５年１月２６日水曜日午後６時１７分

Manual Tuning Procedure

If the VCR is not correctly tuned by Auto Tuning, follow the procedure below.

1Press [MENU] (9) to display the Main menu on the TV screen.

2Press [43] (28) to select [TUNER PRESET] then press [ENTER] (26).

3Press [43] (28) to select [CH] then select the channel number you want to tune by pressing [2 1] (28).

4Confirm that [CLEAR] is set to [OFF].

5Press [43] (28) to select [SEARCH] then press [2 1] (28) to start the Manual Tuning.

		CH 2	SEARCH 74
		CH 2	SEARCH 74
CH 2	SEARCH			END: MENU
	END: MENU

•If the desired TV station has not been tuned, press [2 1] (28) again.

•Press [MENU] (9) and repeat steps 3-5for each programme position you want to tune to a station.

6Press [MENU] (9) three times to exit the On Screen Display.

In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years. After 3 years, clock back up in the event of a power failure can only be guaranteed for maximum of 1 hour.

Preparations

•Confirm that the TV is on and the VCR viewing channel is selected.

•Turn on the VCR.

Operations

1 Press [MENU] (9) to display the

Main menu on the TV screen.		MENU
	CLOCK SET
	TUNER PRESET
	SYSTEM
	OPTION
	TAPE REFRESH
	NAVI MEMORY 0PROG.

	SELECT :		, ENTER
	END	:MENU
2 Press [43] (28) to select [CLOCK
		MENU
SET] then press [ENTER] (26).	CLOCK SET
	TUNER PRESET
	SYSTEM
	OPTION
	TAPE REFRESH
	NAVI MEMORY 0PROG.

	SELECT :		, ENTER
	END	:MENU

Direct Tuning

Follow steps 1 to 4 of Manual Tuning Procedure.

5Press [43] (28) to select [SEARCH].

6Press [Numeric] (3) to enter the number of the desired programme position.

•For other channels that require tuning, repeat steps 3, 4,

5, 6.

7Press [MENU] (9) twice to exit the On Screen Display.

Fine Tuning Procedure

Follow steps 1 to 4 of Manual Tuning Procedure.

3Set each item by pressing

[2 1 4] (28). Press [3] (28) to return to the previous item.

At the set time (TIME) point:

•When [2 1] (28) is kept pressed, the indication changes in 30-minute steps.

4Press [MENU] (9).

•The clock starts.

CLOCK SET

YEAR	2005
MONTH	1
DATE	1 [SA]
TIME	0:00

SELECT:

START: MENU

CLK

5Press [43] (28) to select [FINE] then press [2 1] (28) to obtain the best tuning condition.

•Press [ENTER] (26) to return the tuning to its former state.

	CH 2		AFC: ENTER
6 Press [MENU] (9) to exit the On	FINE	:	END: MENU
	FINE	:	END: MENU

Screen Display.

Blanking of Unused Programme Positions

Follow steps 1 to 3 of Manual Tuning Procedure.

4Press [43] (28) to select [CLEAR] then press [2 1] (28) to select [ON].

•Repeat steps 3, 4 for other unused programme positions to skip during the selection of programme positions.

•To cancel the blanking of a programme position, select that programme position then set [CLEAR] to [OFF].

5Press [MENU] (9) twice to exit the On Screen Display.

Time Reset Function

If the clock is less than 2 minutes slow or fast, it can easily be reset to the proper time.

Example:

Resetting the clock to 12:00

1Press [MENU] (9) to display the Main menu on the TV screen.

2Press [43] (28) to select [CLOCK SET] then press [ENTER] (26).

3When the current clock displays on the VCR is between 11:58 and 12:01, press [MENU] (9) as soon as you see the 12:00. This resets the time to 12:00.

LSQT0879