Panasonic NV-HV60 Series, NV-MV20 Series, NV-HV55 Series Recording, Tape Remain counter/indicator

Recording

VCR

SP

VCR

SP

	SV120 HV60 HV65 HV55 HV50 MV20 MV15
REC	Set the TV set to the video channel and insert a cassette into the video recorder;
	make sure that the cassette's protection tab is still in.

!Select a channel to record from.

Select the AV channel if you are recording via the 21-pin scart cable.

!Press REC to start recording.

!Press the Stop button to stop recording.

!To pause recording:

The function will switch itself off after approx. 5 minutes to protect the video heads.

!To resume recording:

DRecordings in the S-VHS or S-VHS ET REC mode are supported by the PAL TV system only. (Only SV120, page 23)

	SV120 HV60 HV65 HV55 HV50 MV20 MV15
OSD/DISPLAY	Tape Remain counter/indicator
	The display of the video recorder shows: time - counter - tape remain.
	The start of a cassette is indicated as -----.
	! Press OSD/DISPLAY until 'RE' is displayed.
	SV120 HV60 HV65 HV55 HV50 MV20 MV15
SP/LP/EP	! Prior to starting the recording session, press SP/LP/EP to set the tape speed.
	SP : normal recording time	-	optimal picture quality
	LP : double recording time	-	simple picture quality
	EP : triple recording time	-	reduced picture quality

DWhen you play back LP or EP recordings, some cassettes (e.g. E-300 type) may produce interference. This is not indicative of a malfunction.

10