
ShowView
ShowView
8 3 5 4 2 - - - -
0 - 9 :enter | ENTER : access |
: correct | EXIT : exit |
Timer recording |
| 1/3 | ||
Pos | Date | Start | Stop | VPS |
PDC | ||||
1 | ARD 31/12 | 10:30 11:30 | SP ON | |
1 | ARD 31/12 | 11:30 12:30 | SP ON | |
2 | ZDF 31/12 | 12:30 13:30 | SP OFF | |
- - - - - - - | - - - - | |||
- - - - - - - | - - - - | |||
- - - - - - - | - - - - | |||
:select | ENTER : access |
| ||
CANCEL :delete | EXIT | : exit |
|
| SV120 HV60 HV65 HV55 HV50 MV20 MV15 |
ShowView ! | Press the ShowView button. |
! | Enter the ShowView number (press to correct any mistakes) |
!ENTER
The Timer recording screen is displayed.
TIMER
!Press TIMER to activate the timer mode.
Ensure that the video recorder symbol is displayed.
If the unit fails to automatically detect the station press or CH to enter it manually. The video recorder will store the information so that you will not have to enter it again later.
Editing the Timer recording data
!ENTER
!Select a station ,
or press CH
!Set the date, week or day of week ,
or press DATE
!Enter the start time: ,
or press ON
!Enter the stop time: ,
or press OFF
!Set the tape speed: A (Automatic), SP, LP, EP ,
(does not apply to MV20)
TIMER
!ENTER
!Press TIMER to activate the timer mode.
DShowView is a trademark of Gemstar Development Corporation.
The ShowView system is manufactured under licence from Gemstar Development Corporation.
14