Panasonic PV DM2092 Multiple Angle Viewing DVD only, Picture Zoom DVD only, Press Angle in Play

Page 49

*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again.

When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc.

Multiple Angle Viewing (DVD only)

DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. You can view these angles,

if available, using the ANGLE button.

ANGLE Indicator

Notes

ANGLE Indicator lights up on the unit when a scene recorded at different angles is detected.

The angle number can be set beforehand so that the angle is switched whenever ANGLE Indicator lights up.

Notes

Closed captioning will not be displayed while Picture Zoom is used. To see subtitles, set the subtitle feature to ON (see page 48).

The subtitle cannot be enlarged nor can it’s position be changed.

The picture zoom feature does not work with a Video CD.

During picture zoom, “ZOOM1” or “ZOOM2” is displayed on-screen.

Zooming, on some discs, may result in poor picture quality, or may not operate at all.

1

Press ANGLE in Play

 

mode to display the angle

 

selection on-screen.

 

• Display disappears after 5

2

seconds.

 

1) Press

to select the

 

desired angle.

Number of angle being played back.

Vocal selection for Karaoke discs (DVD/Video CD)

aPress AUDIO in Play mode to display the audio screen.

b

 

 

 

1) Press

 

(or

 

) to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

select as shown below.

 

 

 

 

2) Press

 

(or ) to set.

 

 

 

 

 

 

 

(DVD only)

 

 

 

 

• DVD Karaoke (1 vocal) VOCAL ON

 

VOCAL OFF

 

 

 

 

 

Advanced

 

 

 

 

 

 

Picture Zoom (DVD only)

 

 

 

 

 

• DVD Karaoke (2 vocals) VOCAL V1 + V2

 

VOCAL V1

 

VOCAL V2

 

VOCAL OFF

 

• Video CD

 

LR

L

R

 

 

 

 

 

Operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can enlarge specific portions of a picture and

 

select the zoom ratio using the ZOOM button on the remote during DVD playback.

Set Zoom size.

Press ZOOM repeatedly to change display as follows.

You can enlarge the center portion of the image to one of 2 magnifications.

X 1.0 (ORIGINAL)

X 1.5 (ZOOM 1)

X 2.0 (ZOOM 2)

1st press

 

2nd press

Hello!

Hello! ZOOM 1

Hello! ZOOM 2

 

 

3rd press

Use the , , and buttons to move the position up, down, left and right.

49

Image 49
Contents Advanced Operation Model No. PV-DM2092Power Cord Plug Power Source CautionPower Cord Avoid Extremely HOT Locations or Sudden Temperature ChangesInside of product Region number For this unit isRegion Management Information Battery replacement caution Before UsingLoading the Batteries Prevent Accidental Tape ErasureTable of Contents Features for a Quality Picture Head Cleaning SpecificationsInformation Unit, Cassette, Disc DST Daylight Saving TimeVideo CD Disc formats supported by this unitMP3 Discswhichcannotbeplayedwiththisunit Location of Controls Remote Control ButtonsNumber Keys Universal Light Tower Illuminated Remote Control Indicators on the Front PanelProg Timer Indicator Light buttonFast FORWARD/SEARCH Front View of the unitPLAY/REPEAT REWIND/SEARCHConnections AC Power PlugRear View of the unit Terminal on the unitUnit Amplifier Speaker Ready ChecklistVideo For your referenceUnit Dolby Digital Decoder Amplifier Speaker or Firmly connect the cable to the connectorUnit dts digital theater systems Decoder Amplifier Speaker Initial Setup Ready to Play Initial Setup Ready to PlayPress on the remote for TV-VCR mode Settings are made automaticallyPower will shut off Please ignore no Cassette warning Perform Initial Setup onManual Clock Set PressLanguage Reset Language, Channels, ClockChannels ClockTime Zone Adjust Time Zone AdjustPlayback a Tape Record On a Tape Playback Source Recording Editing unit Selecting Input ModeBasic Operation Basic DVD Operation Press POWER* on the remote or unit Insert a discPress OPEN/CLOSE Resume function Auto-Power Off functionStill Pause Picture Slow Motion picture DVD/Video CDUsing the 100 key Press PowerOn the remote or unit Rapid TuneMTS Broadcast/TV Stereo System Audio Mode for TV ViewingReceivable Broadcast Types Press Display to displayClosed Caption System Closed Caption Mode FeatureClosed Caption is Press SET toMode Caption On Mute FeatureCC on Mute Press Action three timesON-TIMER with Alarm TV Timer FeaturesSleep Timer Blue Screen Display TV/VCR Status & Clock DisplayChannel & Function Display Press DisplayFM Antenna Setup FM Radio SetupMake sure FM tuning is done correctly see FM Radio Setup FM RadioAudio Mode for FM Radio Using FM RadioKey 1~9 to Press AudioPress SET to display screen Timer RecordingPress Prog to end To Enter More ProgramsTo Clear program To Replace programRepeat steps 1 and 2 on Universal Remote Control is Universal Remote Control SetupConfirm code entry Cable Box Brand Code Numbers DSS Brand Code NumbersIndex Search Tape OperationSearch System is To calculate the Index NumberProgram End Search To cancel Press Play or StopPress FF To start searchZero Search Repeat PlayCommercial Skip Auto Operation FunctionsOFF Press Action three times to end setup Special VCR FeaturesChannel Caption Channel Caption isWeak Signal Display Feature Remote Warning FeatureVCR Lock 1Press ActionEnter Secret Code Chip Control FeaturePress SET to set US Movies RatingsAdvanced OperationPress Action four times to exit this mode Process of V-Chip Control Feature EnterCode Setup BlockingUS TV Programs Ratings ProgramsBlocking Message ProcessofV-ChipControlFeatureBlocking To View a Blocked Program/MovieAudio Mode for Playback Audio FeaturesAudio Mode for Recording With the proper audio mode setting, your unit canDVD VOL Adjust DVD Volume AdjustSurround Sound System Set Surround soundAudio Menu Video MenuDo steps 1 3 left Video MenuVideo Adjustment Video / Audio AdjustmentAudio Adjustment Video AdjustmentSubtitle Language DVD only Disc OperationPress SUB Title SubtitlelanguageNo AudiosoundtracklanguageNoPicture Zoom DVD only Multiple Angle Viewing DVD onlyPress Angle in Play Vocal selection for Karaoke discs DVD/Video CDPress Menu in Play mode to display DVD menu Press TITLE* in Play mode to display title screenTitle menu DVD only DVD menu DVD onlyProgram Repeat Play Video CD/CD Program Play Video CD/CDDo steps 1 through 6 on this Press Display again to display Unit Information screenRandom Play Video CD/CD Press ACTION* in Stop mode to displayTo select DVD Random PlayPress SET to set Ready Checklist Press to select the settingPress or to select an item Disc information screen for DVD Detailed Descriptions of Each On-Screen DisplayDisc information screen for Video CD/ CD Repeat Play Unit information screenFor repeat play in VCR mode, see CHAPTER/TITLE Repeat Play DVDSelect Play Mode During Stop mode Select parent folder During Stop modeMP3 Playback Operation Press OPEN/CLOSEDVD Lock Ratings DVD only Perform DVD Lock setting in TV modeDVD Lock UnlockedDisc Languages DVD only Settings for DVD OperationPress SET AUDIOselections Subtitle selectionsAudio Output Do steps 1 and 2 onRepeatedly for output See belowStill Mode Selecting TV ModePress SET repeatedly for mode. See below Code Language Language Code ListPower Correction Before Requesting ServiceRemote Control Correction Monitor CorrectionDVD/Video CD/CD Correction Rotate Play mode and from Play to Rewind Search modeMiscellaneous Correction Now, pull the tray all the way out and remove the disc. PRecording or set the On-Timer Clock is not set If you attempt to set or review a TimerIf you press Stop during a Timer Recording If head cleaning becomes necessaryAjustar de nuevo el reloj Conexión para Ant./CableGrabación con temporizador Operaciones básicas para la reproducción VCROperaciones básicas para la grabación Cambio del idioma de subtítulos DVD solamente Operaciones básicas del DVDCambio del idioma de la pista de sonido DVD solamente Selección de vocal para los discos de Karaoke DVD/Video CD Visión desde otro ángulo DVD solamenteAmpliación de la imagen DVD solamente Utilización de un menú de títulos DVD solamenteReproducción arbitraria Vídeo CD/CD Reproducción programada Vídeo CD/CD1Presione 1Presione para seleccionar Iniciar 2Presione SETFijaciones iniciales Selección de Detener Rastreo Selección de Salida DE AudioSelección de 4 3 Preferencia Limited Warranty Limited WarrantyLimited Warranty Coverage Parts Labor Service Contact NumberLimited Warranty Limits And Exclusions Customer Services DirectoryIndex Chip Control Feature Tape Operation Timer Program Review, Replace, ClearVolume UP / Down button Weak Signal Display FeatureLSQT0608A