Analog connection
Connect an analog amplifier to enjoy
IMPORTANT NOTE:
Caution for optical digital audio output connector:
•Be sure to refer to page 50 regarding output settings of Dolby Digital, DTS, and PCM.
•CDs and Video CDs can be played as usual.
•Audio from the Digital Audio Out terminal is only output during playback.
•When connecting an amplifier which contains the Dolby Digital or DTS decoder, be sure to select “Bitstream”. When connecting an amplifier which does not contain the Dolby Digital or DTS decoder, be sure to select “PCM”. (See page 50.) Otherwise, attempting to play a DVD may cause such a high level of noise that it may harm your hearing and damage your speakers.
Notes:
•Some DTS decoders which do not support
•Avoid bending/twisting the optical digital cable when connecting.
For your reference:
•Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories Licensing Corporation. Supporting
•Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
•If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full
5.1 channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic Surround Sound Decoders please contact your local dealer.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No’s. 5,451,942, 5,956,674, 5,974,380, 5,978,762, 6,487,535 and other U.S. and
Manufactured under license from Dolby Laboratories. Dolby and the
12 |
|
For assistance, please call : |