Panasonic NV-VP32 Various indications in on-screen display, Press VHS Status, Changing audio

Page 25

Settings Using the On-Screen Display

Various indications in on-screen display

To see these displays, set the OSD item in the “OPTION” menu to “AUTO” (l 24).

Press [VHS STATUS].

The time and operation details appear on the screen for about 5 seconds.

1Channel display

2STEREO or BILINGUAL indicator (NV-VP32GL)

Indicates when a programme is broadcast in Stereo or Bilingual.

STEREO, M1 and M2 Indicator (NV-VP32GN)

Indicates when a programme is broadcast in Stereo, Bilingual or NICAM. STEREO: When receiving a Stereo/NICAM stereo broadcast.

M1/M2: When receiving a Bilingual/NICAM dual-sound broadcast.

M1: When receiving a NICAM monaural broadcast.

To hear stereo sound, connect to a TV or Stereo Amplifier with left and right audio inputs (l 8, 9).

3L and R indicators

The Left (L) and Right (R) indicators show which sound mode is selected as follows: Stereo: Both the L and R indicators appear.

L:The L indicator appears.

R:The R indicator appears.

Normal: Neither the L nor R indicator appears.

4Operation status display

5Shows the time and tape counter

Pressing [VHS STATUS] once makes the on-screen display appears. After that, press the

button repeatedly to change the display as follows:

Present time>Tape counter>Remaining tape time>Present time During Index Search: “S 01” to “S 20” is displayed.

During Jet Rewind: “J.REW” is displayed.

≥Press [CANCEL/RESET] to reset the tape counter (elapsed time) to “0:00.00”.

The tape counter is automatically reset to “0:00.00” when inserting a video cassette. ≥The remaining time is approximate. It will be incorrect if you set the wrong tape time in the

“TAPE SELECT” item in the “OPTION” menu and if the tape is of poor quality.

6Cassette-in indicator

Shows whether you have loaded a cassette.

7Colour system indicator (l 23)

Shows selected colour TV system except “AUTO”.

8Recording mode indicator (l 16)

CH 1

STEREO L R

PAL

VHS Operations

Notes:

≥These displays do not appear when paused or during slow play.

≥The on-screen display may be distorted depending on the playback tape or the input signal.

Changing audio

To change the audio, press [AUDIO].

The audio changes as follows:

 

When playing a tape:

Stereo>L>R>Normal audio track>Stereo

While watching the TV:

Stereo>L>R>Normal>Stereo

≥You cannot change the audio while you use “dc” channel (l 42).

¬To play back tapes recorded Stereo or Bilingual programmes (NV-VP32GL only)

Select the desired sound mode with [AUDIO] during playback. Recording on the unit is automatically made in the stereo or bilingual mode. This prevents errors in the selection of the dubbed or the original language.

¬The NICAM Broadcast System (NV-VP32GN only)

NV-VP32GN is equipped with the NICAM sound system. NICAM is a 2-channel sound broadcast system to provide either a high quality stereo sound track or 2 independent MONO sound tracks, M1 and M2. NICAM programmes are always accompanied by standard sound broadcasts and you can select the desired sound with [AUDIO] during playback.

≥The NICAM digital stereo sound can only be recorded on the Hi-Fi audio track.

≥To record the regular sound (ordinary normal sound) on the FM audio tracks when a NICAM programme is received, set “MONAURAL” to “ON” (OPTION l 24).

IMPORTANT

When NV-VP32GN is switched on, the tuner will be automatically switched to a NICAM broadcast, if NICAM is being transmitted.

At this time the NICAM signal is transmitted on stereo channels only, since the M1 and M2 formats are not yet available. Even if the sound track is MONO, the stereo indicator will appear.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents DVD Player Video Cassette Recorder Model No. NV-VP32 Series Contents For your safety AccessoriesCondensation may form in the following cases About descriptions in these Operating InstructionsVHS Deck and Cassette Tape Information Remote ControlDisc Information Main Unit Control Reference GuideUnit’s Display SLPªVHS and DVD button Control Reference GuideBasic Connections ConnectionsAudio/Video Output Sockets For better video from DVDTo enjoy sound through other audio equipment ConnectionsDigital connection Analog connectionRefer to the chart below for the code of your TV TV Maker SettingOperating the TV Check whether the TV can be operated properlyTo restart Plug in Auto Tuning Tuning the TV to Your UnitPress Menu Press VHS Í to turn on this unitPress Menu to start the clock and exit the setting screen Setting Up for VHSPress Menu Press 34 to select the menu Press Enter Clock SETPress Enter and then Setup to end the settings DVD Quick SetupTV Aspect Progressive Out ComponentInsert a recorded video cassette tape Press 1 Play PlaybackDuring play, press TRACKING/V-LOCK or Adjusting the playback pictureWhile paused, press TRACKING/V-LOCK or Ntsc PlaybackRecording Press REC Mode to select the recording modePress Chji buttons to select the TV station Menu 4 Press REC¥ to start recordingRecording from an external source One-Touch Recording OTRTape Refresh Press PROG/CHECK Press 2 1 to set the date on which Timer RecordingTV programme will be broadcast PressTo check and cancel a Timer Programme Timer RecordingRecording Mode Auto Change Function Press PROG/CHECK twiceJet Navigator Search FunctionsPress Navi ProgrammeVHS Index Search System Viss Search FunctionsPress backward or 9 forward Easy Programme PlaybackTuner Preset Settings Using the On-Screen DisplayPress 34 to select Auto Tune Press 2 1 to start Auto Tuning Auto TuningSystem Tape Select OptionNtsc Input Select Ntsc PB SelectPress VHS Status Various indications in on-screen displayChanging audio To change the audio, press AudioPress OPEN/CLOSE to open the disc tray Playing Discs-basic playPlace the disc with the label facing upward Position Memory Playing Discs-basic playDuring play, press P.MEMORY Chapter ReviewStarting play from a selected item Convenient FunctionsStarting play from a selected group Quick ReplayConvenient Functions Picture ModeAV Enhancer Press AV Enhancer to select OnProgram Play Changing Play SequenceRandom Play Direct Navigator Playing the Programmes or Play Lists on DVD-RAMPlaying a play list ªUsing navigation menus Using playback menus except Jpeg files on DVD-RAMMP3/WMA, CD text and Jpeg Navigating Menus Naming folders and filesPlaying HighMAT discs MP3/WMA, CD text and Jpeg Navigating MenusFind Changing soundtracks, subtitles and angles To Enjoy Movies and Music MoreDuring play, press Audio Press 1 to select On and press EnterTo Enjoy Movies and Music More Effective listening using the front speakers onlyAdvanced Surround Angles DVD-VRepeat Play Press 34 to select the preset aspect ratioVariable Zoom function Press 34 to select Just Fit ZoomandManual Zoom Digital outputPCM Digital Output Dolby Digital, DTS Digital Surround and MpegElapsed play time indicator Using On-Screen MenusMain Menu Other settings Using On-Screen MenusPress Setup Changing SettingsEntering a password Ratings Press 34 to select the menu’s tabSetup menu Changing SettingsMenus Items Manual Dubbing Recording from DVD to VHSDVD-RAM Dubbing General Before Requesting ServiceSound Stills in the Setup menu Before Requesting ServiceDisc play VHS pictureSelf-diagnostic Indications on the unit’s display Error MessagesDisc picture Editing1 ch GlossarySpecifications
Top Page Image Contents