Playing Discs-basic play, Position Memory

Playing Discs-basic play

Notes:

≥If “ ” appears on the TV, the operation is prohibited by the unit or disc.

≥When the unit is first turned on and there is a disc loaded, it may start playing automatically.

≥When the whole disc has finished playing, the unit automatically stops. Some discs show a menu screen.

≥The disc keeps rotating when showing a still picture (pausing).

≥Pressing [6]/[: ] or [ 5]/[ 9] may take you to a menu screen depending on the disc or the portion played (e.g. Video CDs).

≥[VCD] You cannot move backwards during slow-motion and frame-by-frame.

≥Each press or hold [6] or [ 5] accelerates the search or the slow-motion speed in 5 steps. ≥Slow-motion and frame-by-frame only work on moving pictures.

When a menu screen appears on the TV [DVD-V][VCD]

Press the numeric buttons to select the desired item.

Example: “03”; [3]

“10”; [S10]l[1]l[0]

≥You can also use [3421] to select items. Press [ENTER] to confirm your selection.

¬To revert to the menu screen Press [MENU] (PLAY LIST).

¬To show the top menu

Press [TOP MENU].

Notes:

≥Many Video CDs with playback control display a menu on the TV when played back. “PBC” is displayed in the unit’s display.

≥The operation may differ depending on the disc. Read the disc’s instructions for further details about operation.

≥Discs continue to rotate while menus are displayed.

Press [∫] when you have finished viewing to preserve the unit’s motor and your TV screen.

Position Memory

[DVD-V[ [RAM[ [VCD] [CD] [MP3] [WMA]: When the elapsed play time is displayed. [JPEG]

Memorize positions on up to 5 different discs to restart play after turning off or changing discs.

..........................................................................................................................................................................................................................................................................................................................................

[1] During play, press [P.MEMORY].

≥Press again to replace the position.

Position memorized

Flashes as you memorize a position.

DVD Operations

[2] Turn off the unit or remove the disc.

[3] Turn on the unit or set a disc for which the position is memorized and press [1] (PLAY).

≥Play starts from the memorized position and the position is cleared. ≥When playing DVD-Video, see Chapter Review (l below).

Notes:

≥If you set up 6 positions or more, the oldest position memory is replaced.

≥This function may not work while playing some DVDs or play lists on DVD-RAM.

Chapter Review

[DVD-V]

When the Resume function is active, you can review the first few seconds of each chapter previously played.

When “ ” in the unit’s display flashes, the message appears by pressing [ 1] (PLAY) once.

Press [1] (PLAY) again.

≥After reviewing the chapters up to the one where you memorized the position, play resumes from that position.

¬To clear the position Press [∫].

Notes:

≥If you do not press [ 1] (PLAY), the message disappears and play starts from where you press [∫] or [P.MEMORY].

≥The position is also cleared when you turn the unit off, select another source or open the disc tray. ≥This is operative only in the current title.

Press PLAY to Chapter Review