Digital output, Manual Zoom, PCM Digital Output

To Enjoy Movies and Music More

ªManual Zoom

During play,

..........................................................................................................................................................................................................................................................................................................................................

[1] Press [DISPLAY] and press [34] to select “Other Settings”.

[2] Press [ 1] then [34] to select “Display Menu” and press [ENTER].

[3] Press [34] to select “Manual Zoom” and press [ 1].

[4] Press [34] to adjust.

The ratio changes in 0.01 units between 1.00 and 1.60 and in 0.02 units between 1.60 and 2.00.

Notes:

≥The ratio automatically will return to 1.00 when you open the disc tray, change the source or turn off the unit.

≥Refer to the disc’s instructions and “Variety of screen sizes” (l 36) for the aspect ratio of the picture.

e.g. [DVD-V[

Title	1 /	2	Play Speed
Chapter	1 /	1	AV Enhancer
Time	0:02:36		Play Menu
Audio	1 English
			Picture Menu
Subtitle		Off
			Audio Menu
Angle	1 /	1
			Display Menu
Other Settings

Display Menu
to select and press ENTER				RETURN to exit

Subtitle Position	0	x 1.00
Subtitle Brightness	0
Just Fit Zoom
Manual Zoom	x 1.00
Bitrate Display	Off
GUI See-through	Off
GUI Brightness	0
Manual Zoom x 1.00
to set		RETURN to exit

Digital output

[DVD-V[

When you have connected equipment through this unit’s OPTICAL DIGITAL AUDIO terminal (l 9), change the settings for “PCM Digital Output”, “Dolby Digital”, “DTS Digital Surround” and “MPEG” (l 41). You can enjoy the powerful movie theater and hall-like sound.

[1] Press [SETUP].

[2] Press [34] to select “Audio”.

[3] Press [ 1] then [34] to select the item (l below).

[4] Press [ENTER] and then [SETUP] to end the settings.

PCM Digital Output

DVD Setup

Disc		PCM Digital Output	Up to 48 kHz
Video		Dolby Digital	Bistream
Audio		DTS Digital Surround	PCM
Display		MPEG	PCM
Others		Dynamic Range Compression	Off
		Audio during Search	On

	to select and press ENTER		RETURN to exit

Operations

Check the digital input limitations of the equipment you connect using COAXIAL terminal and select the maximum sampling frequency of PCM digital output.

Up to 48 kHz (Initial setting)	: When connected to equipment compatible with 44.1 or 48 kHz
Up to 96 kHz	: When connected to equipment compatible with 88.2 or 96 kHz

Notes:

≥Signals from copy-protected discs are converted to 48 or 44.1 kHz.

≥Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can handle 96 kHz. Read your equipment’s operating instructions for details.

Dolby Digital, DTS Digital Surround and MPEG

Bitstream (Initial setting for Dolby Digital):

Select if the equipment you connected can decode the signal.

PCM (Initial setting for DTS Digital Surround and MPEG):

Select if the equipment you connected cannot decode the signal.

IMPORTANT

Select “Bitstream” when the equipment can decode the bitstream (digital form of multi-channel data). Otherwise, select “PCM”.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other U.S. and world-wide patents issued and pending. “DTS” and “DTS 2.0+Digital Out” are trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All rights reserved.