Connections, Digital connection | Panasonic NV-VP32 guide

Connections

The output terminal common to VHS and DVD, and the one exclusively for DVD

	COMPONENT VIDEO
	(NTSC: 480P/480I PAL: 576I)				R-AUDIO-L	VIDEO
	PR	PB	Y			AV1 IN
DIGITAL AUDIO						AV1 IN
(PCM/BITSTREAM)
DVD OUT
						VHS/DVD
						OUT
OPTICAL	R-AUDIO-L		VIDEO	S VIDEO	R-AUDIO-L	VIDEO

DVD-only terminal	Output common to
DVD OUT	VHS and DVD
	VHS/DVD OUT

For the VHS/DVD OUT terminal, VHS and DVD outputs can be switched or it can be assigned for VHS output only (l 12).

The DVD OUT terminal can only output the DVD signal.

Note:

≥When Video is switched to DVD or vice versa, the audio volume may suddenly increase or decrease. This is because when the audio output of this unit is connected to the TV, etc., the audio output of the DVD is generally lower.

≥When you increase the volume level to play back DVD audio, reduce it when playback is finished.

Started

To enjoy sound through other audio equipment

You can enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers.

Digital connection

Getting

Amplifier (Not supplied)

		Insert fully with
Connect 3 or more speakers		this side facing up.
Connect 3 or more speakers
for surround sound.	(DVD) IN
for surround sound.
	Optical digital cable
	(Not supplied)
	Do not bend sharply
	when connecting.	OPTICAL

¬To enjoy multi-channel surround sound

Connect an amplifier with a built-in decoder or a decoder-amplifier combination.

Change the settings in the SETUP menu (l 37, 41).

You can only use DTS Digital Surround decoders that are compatible with DVD.

≥Turn the Advanced Surround function “Off” (l 35).

¬To enjoy stereo or Dolby Pro Logic Connect a digital amplifier or system component.

Change the settings in the SETUP menu (l 37, 41).

AC IN ~		COMPONENT VIDEO					IN
AC IN ~	(NTSC: 480P/480I PAL: 576I)				R-AUDIO-L	VIDEO
	Y	PB	PR				AV1 IN
DIGITAL AUDIO							AV1 IN
(PCM/BITSTREAM)
DVD OUT
							OUT
							VHS/DVD
							OUT
OPTICAL	R-AUDIO-L		VIDEO	S VIDEO	R-AUDIO-L	VIDEO	RF

Analog connection

Amplifier (Not supplied) or system component (Not supplied)

¬ To enjoy stereo or Dolby Pro Logic

Connect an analog amplifier or system component.

Change the settings in the SETUP menu (l 37, 41).

The audio terminal of VHS/DVD OUT can also be connected.

AUX IN

R	R - AUDIO - L

Audio cable (Not supplied)

Notes:

≥To purchase an optical digital cable (not supplied), check the terminal shape of the equipment to be connected beforehand.

≥The OPTICAL DIGITAL AUDIO terminal is provided with a cap to prevent dust from entering. Simply plug into it, and the cap will be encapsulated in the unit.