Pelco DX9100 installation manual Installation Guidelines

Page 16

INSTALLATION GUIDELINES

Follow these guidelines for the best system performance.

¥The DX9100 recorders require connection to an uninterruptible power supply (UPS) to ensure no corruption of data during a power loss.

¥The DX9100 system must be installed in a climate-controlled room. The temperature range should be 41° to 85°F (5° to 29°C).

¥All network devices that will transport DX9100 video must be capable of moving multicast traffic.

¥Pelco recommends that the DX9100 recorder be installed in a ventilated rack enclosure.

¥When securing the recorder to the rack enclosure, do not lift the recorder by the handles only.

¥Make sure the rack enclosure is properly grounded.

¥Pelco recommends that a spare phone line be installed and connected to a primary DX9100 viewstation to allow the Pelco Technical Support Group to dial into the site upon customer request. Pelco personnel will not make changes unless authorized by the customer. This phone line can be protected by a password to prevent unauthorized access.

Lack of adherence to these guidelines gives Pelco discretion in honoring product warranty.

16	C636M-E (4/05)

Image 16

Contents I N S T A L L A T I O N M A N U A L C636M-E 4/05Recorder & DX9100 ViewstationSection CONTENTSPage SPECIFICATIONS WARRANTY AND RETURN INFORMATION C636M-E 4/05LIST OF ILLUSTRATIONS C636M-E 4/05 LIST OF TABLES PageServer State Symbols Channel SetupIMPORTANT SAFETY INSTRUCTIONS REGULATORY NOTICES DX9100DVR SeriesRADIO AND TELEVISION INTERFERENCE DX9100VSRDESCRIPTION MODELS FRONT VIEW RECORDER Power LED HDD Hard Disk Drive LED Handle Rack Ear Fan VentilationLock 2 Keys Supplied Power Button Fan Figure 2. Front View of RecorderBACK VIEW RECORDER FRONT VIEW VIEWSTATION Power LED HDD Hard Disk Drive LED Key Lock 2 Keys Supplied Fan Ventilation Handles Rack Ears Fan Power Button DVD-RW/CD-RW 3.5-Inch Floppy DriveBACK VIEW VIEWSTATION Power Input 100-240 VAC PS/2 Connectors Keyboard/MouseSecondary RJ-45 Network Connector USB Ports RS-232 Connector COM Parallel Port Primary RJ-45 Network ConnectorINSTALLATION INSTALLATION GUIDELINES MOUNTING To install the unit into an equipment rack CONNECTIONS Figure 8. System Connections ALLOWS MULTIPLE VIEWSTATIONSAND RECORDERS MAXIMUM OF INTO THE BOTTOM RIGHT USB PORTWIRING ALARMS AND RELAYS POWER UP THE EQUIPMENT VIEWSTATION NETWORK CONFIGURATION PROGRAMMINGCHANGING THE VIEWSTATION’S IDENTIFICATION CHANGING THE VIEWSTATION’S IP ADDRESS AND SUBNET MASK 4. Click Properties. The following dialog box appears CHANGING THE RECORDER’S IDENTIFICATION TIME SYNCHRONIZATION SETTING DATE/TIME PROPERTIES CLIENT CONFIGURATION UTILITY 5. Select ÒStandard namingÓ or ÒCustom naming.Ó RECORDER INITIALIZATION OPTIONS 10. Click Configure 11. Restart all recorders and viewstations SERVER STATE Symbol Figure 28. Error AlertStatus DATABASE BACKUP AND REPAIR ADVANCED RECORDER OPTIONSDATABASE RESTORATION Figure 31. System TrayFigure 35. Start/Continue Window 7. Exit the window 6. Click Yes. Start/Continue is enabled after several secondsFigure 36. My Computer Window Figure 37. Databases Window 10. Rename MSSQL to MSSQLold 9. Go to D\Databases. The following window appearsFigure 38. Rename MSSQL 11. Go to C\Copy of D Drive\Databases. The following window appears Figure 39. C Drive Databases Window12. Copy the MSSQL folder and paste it to D\Databases Figure 40. MSSQL Folders 13. Delete MSSQLold14. Double-click the SQL server icon. The following window appears Figure 44. Restore Utility Dialog Box 23. Go to the system tray Figure 45. System TrayFigure 43. Explorer Windows Figure 46. Server Service Manager Window 27. Click Yes. Start/Continue is enabled after several seconds24. Double-click the SQL server icon. The following window appears 25. Click Stop. The following dialog box appears28. Select SQL Server Agent from the Services drop-down box Figure 54. Finished Scan Dialog Box CONFIGURING STANDARD ALARM AND RELAY PROPERTIES To set or change camera recording properties CAMERA RECORDING PROPERTIESFigure 58. Camera Properties Dialog Box Figure 59. Select Channel Dialog Box 3. Select a channel Figure 60. Continuous Recording Schedule PageCONTINUOUS RECORDING SCHEDULE DAILY RECORDING SCHEDULETo delete a time period 1. Click ÒNo record.Ó Figure 62. Daily Event Recording Page2. Click the box in the time bar WEEKLY RECORDING SCHEDULE MOTION DETECTION CHANNEL SETUP Description/Action ParameterChannel Name DEFINING USERS Edit Existing Users Adding a New UserDeleting a User VideoADVANCED FEATURES I/O INTERFACEI/O HANDLER I/O MANAGERCONNECTING AN ALARM UNIT ALARM UNIT CONFIGURATION 4. Click Open. The following dialog box appears I/O Manager for Alarm Unit Figure 75. Sample Configuration for External 1 Source 8. Click Next. The following dialog box appears CONNECTING A RELAY UNIT RELAY UNIT CONFIGURATION Page I/O Manager for Relay Unit Figure 83. Dialog Box to Configure Relay Event Type 6. Click Next. The following dialog box appears7. Select the event type to translate 8. Select ÒNo translation.Ó 9. Click OK and then FinishCONNECTING A CM9760-CC1 Figure 84. Connecting a CM9760-CC1To connect a CM9760-CC1 to a DX9100 recorder CM9760-DTCONNECTING A CM6800 DATA TRANSLATOR CONFIGURATION 4. Click Open. The following dialog box appears I/O Manager for Data Translator 7. Select the event type to translate 8. Select ÒNo translation.Ó Figure 91. Dialog Box to Configure Data Translator Event Type8. Click OK and then Finish DVR MANAGEMENT DATA TRANSLATOR CONNECTIONSCONFIGURING THE DATA TRANSLATOR NOTE Once you complete programming, refer to the CM9760-MGR manual for instructions on macro programming for the matrix switcher. Individual macro commands must be customized within the CM9760-MGR software to switch the appropriate group of cameras to the monitors connected to the standby DX9100 RELAY UNIT CONNECTIONS CONFIGURING THE RELAY UNIT 6. Click Configure. The following dialog box appears FOREIGN LANGUAGE PROGRAMMING 4. Click Set Default. The following dialog box appears SPECIFICATIONS RECORDERElectrical/Video MechanicalVIEWSTATION ElectricalInternal modem for use with pcAnywhere software only Composite monitor port analog adapter providedWARRANTY AND RETURN INFORMATION REVISION HISTORYManual # DateISO9001 World Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120

Related manuals

Manual 104 pages 18.14 Kb