Pelco DX9100 installation manual Advanced Features, I/O Interface, I/O Handler, I/O Manager

Page 57

ADVANCED FEATURES

I/O INTERFACE

The DX9100 system can interface with the CM6800, CM9740, or CM9760 matrix switchers. It can integrate with the CM9760-DT, CM9760-ALM, and CM9760-REL.

¥CM9760-DT data translator translates the ASCII protocol to the P protocol of the CM9740/CM9760 matrix switchers.

¥Connect up to four CM9760-ALM alarm units to each DX9100 recorder.

¥Connect up to four CM9760-REL relay units to each DX9100 recorder.

I/O HANDLER

This application is used to program the onboard alarm and relay driver and allows the installer to identify one additional external deviceÑthe CM9760 data translator, the CM9760-ALM alarm unit, or the CM9760-REL relay unitÑto be connected to the COM port on the recorder. Each of the external devices can be shared across multiple recorders, but when programming to external devices, the programming only needs to be done on the recorder which is physically attached to the device.

I/O MANAGER

This application is used in conjunction with the I/O Handler to configure the DX9100 recorderÕs onboard relays and alarms, and to interface to:

¥the CM9760-ALM if more than the provided 16 inputs are needed

¥the CM9760-REL if more than the provided 2 outputs are needed

¥the CM9760-DT to send software alarms such as video motion detection from the recorder to the matrix

Since these devices can be shared across multiple recorders across the network, the installer can identify alarm inputs 1-16 for recorder #1, alarm inputs 17-32 for recorder #2, and so on.

C636M-E (4/05)

57

Image 57

Contents C636M-E 4/05 I N S T A L L A T I O N M A N U A LRecorder & DX9100 ViewstationCONTENTS SectionPage C636M-E 4/05 SPECIFICATIONS WARRANTY AND RETURN INFORMATIONLIST OF ILLUSTRATIONS C636M-E 4/05 Page LIST OF TABLESServer State Symbols Channel SetupIMPORTANT SAFETY INSTRUCTIONS DX9100DVR Series REGULATORY NOTICESRADIO AND TELEVISION INTERFERENCE DX9100VSRDESCRIPTION MODELS Power LED HDD Hard Disk Drive LED Handle Rack Ear Fan Ventilation FRONT VIEW RECORDERLock 2 Keys Supplied Power Button Fan Figure 2. Front View of RecorderBACK VIEW RECORDER Power LED HDD Hard Disk Drive LED Key Lock 2 Keys Supplied FRONT VIEW VIEWSTATIONFan Ventilation Handles Rack Ears Fan Power Button DVD-RW/CD-RW 3.5-Inch Floppy DrivePower Input 100-240 VAC PS/2 Connectors Keyboard/Mouse BACK VIEW VIEWSTATIONSecondary RJ-45 Network Connector USB Ports RS-232 Connector COM Parallel Port Primary RJ-45 Network ConnectorINSTALLATION INSTALLATION GUIDELINES MOUNTING To install the unit into an equipment rack CONNECTIONS ALLOWS MULTIPLE VIEWSTATIONS Figure 8. System ConnectionsAND RECORDERS MAXIMUM OF INTO THE BOTTOM RIGHT USB PORTWIRING ALARMS AND RELAYS POWER UP THE EQUIPMENT PROGRAMMING VIEWSTATION NETWORK CONFIGURATIONCHANGING THE VIEWSTATION’S IDENTIFICATION CHANGING THE VIEWSTATION’S IP ADDRESS AND SUBNET MASK 4. Click Properties. The following dialog box appears CHANGING THE RECORDER’S IDENTIFICATION TIME SYNCHRONIZATION SETTING DATE/TIME PROPERTIES CLIENT CONFIGURATION UTILITY 5. Select ÒStandard namingÓ or ÒCustom naming.Ó RECORDER INITIALIZATION OPTIONS 10. Click Configure 11. Restart all recorders and viewstations SERVER STATE Figure 28. Error Alert SymbolStatus ADVANCED RECORDER OPTIONS DATABASE BACKUP AND REPAIRFigure 31. System Tray DATABASE RESTORATION6. Click Yes. Start/Continue is enabled after several seconds Figure 35. Start/Continue Window 7. Exit the windowFigure 36. My Computer Window 9. Go to D\Databases. The following window appears Figure 37. Databases Window 10. Rename MSSQL to MSSQLoldFigure 38. Rename MSSQL Figure 39. C Drive Databases Window 11. Go to C\Copy of D Drive\Databases. The following window appears12. Copy the MSSQL folder and paste it to D\Databases Figure 40. MSSQL Folders 13. Delete MSSQLold14. Double-click the SQL server icon. The following window appears Figure 45. System Tray Figure 44. Restore Utility Dialog Box 23. Go to the system trayFigure 43. Explorer Windows 27. Click Yes. Start/Continue is enabled after several seconds Figure 46. Server Service Manager Window24. Double-click the SQL server icon. The following window appears 25. Click Stop. The following dialog box appears28. Select SQL Server Agent from the Services drop-down box Figure 54. Finished Scan Dialog Box CONFIGURING STANDARD ALARM AND RELAY PROPERTIES CAMERA RECORDING PROPERTIES To set or change camera recording propertiesFigure 58. Camera Properties Dialog Box Figure 60. Continuous Recording Schedule Page Figure 59. Select Channel Dialog Box 3. Select a channelDAILY RECORDING SCHEDULE CONTINUOUS RECORDING SCHEDULEFigure 62. Daily Event Recording Page To delete a time period 1. Click ÒNo record.Ó2. Click the box in the time bar WEEKLY RECORDING SCHEDULE MOTION DETECTION CHANNEL SETUP Parameter Description/Action Channel Name DEFINING USERS Adding a New User Edit Existing UsersDeleting a User VideoI/O INTERFACE ADVANCED FEATURESI/O HANDLER I/O MANAGERCONNECTING AN ALARM UNIT ALARM UNIT CONFIGURATION 4. Click Open. The following dialog box appears I/O Manager for Alarm Unit Figure 75. Sample Configuration for External 1 Source 8. Click Next. The following dialog box appears CONNECTING A RELAY UNIT RELAY UNIT CONFIGURATION Page I/O Manager for Relay Unit 6. Click Next. The following dialog box appears Figure 83. Dialog Box to Configure Relay Event Type7. Select the event type to translate 8. Select ÒNo translation.Ó 9. Click OK and then FinishFigure 84. Connecting a CM9760-CC1 CONNECTING A CM9760-CC1To connect a CM9760-CC1 to a DX9100 recorder CM9760-DTCONNECTING A CM6800 DATA TRANSLATOR CONFIGURATION 4. Click Open. The following dialog box appears I/O Manager for Data Translator Figure 91. Dialog Box to Configure Data Translator Event Type 7. Select the event type to translate 8. Select ÒNo translation.Ó8. Click OK and then Finish DATA TRANSLATOR CONNECTIONS DVR MANAGEMENTCONFIGURING THE DATA TRANSLATOR NOTE Once you complete programming, refer to the CM9760-MGR manual for instructions on macro programming for the matrix switcher. Individual macro commands must be customized within the CM9760-MGR software to switch the appropriate group of cameras to the monitors connected to the standby DX9100 RELAY UNIT CONNECTIONS CONFIGURING THE RELAY UNIT 6. Click Configure. The following dialog box appears FOREIGN LANGUAGE PROGRAMMING 4. Click Set Default. The following dialog box appears RECORDER SPECIFICATIONSElectrical/Video MechanicalElectrical VIEWSTATIONInternal modem for use with pcAnywhere software only Composite monitor port analog adapter providedREVISION HISTORY WARRANTY AND RETURN INFORMATIONManual # DateWorld Headquarters 3500 Pelco Way Clovis, California 93612 USA ISO9001USA & Canada Tel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120

Related manuals

Manual 104 pages 18.14 Kb