Pelco DX9100 installation manual Parameter, Description/Action, Channel Name

Page 54

 

Table B. Channel Setup

 

 

Parameter

Description/Action

 

 

Channel Name

Enter a new name for this channel. You can enter up to 20 characters.

 

 

Brightness

Drag the triangle to change the brightness value. The higher the value, the higher the bit rate. The

 

previous value is displayed to the right of the brightness bar.

 

 

Contrast

Drag the triangle to change the contrast value. The higher the value, the higher the bit rate. The

 

previous value is displayed to the right of the contrast bar.

 

 

Hue

Drag the triangle to change the hue value. The previous value is displayed to the right of the hue bar.

 

 

Sat V

Drag the triangle to increase or decrease the red color in the video. The previous value is displayed to

 

the right of the Sat V bar.

 

 

Sat U

Drag the triangle to increase or decrease the blue color in the video. The previous value is displayed to

 

the right of the Sat U bar.

 

 

Vertical

This reduces or eliminates video noise. The higher the value, the lower the bit rate. The lower the

 

value, the higher the bit rate.

 

 

Horizontal

This reduces or eliminates video noise. The higher the value, the lower the bit rate. The lower the

 

value, the higher the bit rate.

 

 

Black/White

Select this checkbox if the channel is connected to a black/white camera. This option ignores video

 

noise.

 

 

White Crush

Select this checkbox to reduce the intensity of the white images.

 

 

54

C636M-E (4/05)

Image 54
Contents Recorder & DX9100 I N S T A L L A T I O N M A N U A LC636M-E 4/05 ViewstationCONTENTS SectionPage SPECIFICATIONS WARRANTY AND RETURN INFORMATION C636M-E 4/05LIST OF ILLUSTRATIONS C636M-E 4/05 Server State Symbols LIST OF TABLESPage Channel SetupIMPORTANT SAFETY INSTRUCTIONS RADIO AND TELEVISION INTERFERENCE REGULATORY NOTICESDX9100DVR Series DX9100VSRDESCRIPTION MODELS Lock 2 Keys Supplied Power Button Fan FRONT VIEW RECORDERPower LED HDD Hard Disk Drive LED Handle Rack Ear Fan Ventilation Figure 2. Front View of RecorderBACK VIEW RECORDER Fan Ventilation Handles Rack Ears Fan Power Button DVD-RW/CD-RW FRONT VIEW VIEWSTATIONPower LED HDD Hard Disk Drive LED Key Lock 2 Keys Supplied 3.5-Inch Floppy DriveSecondary RJ-45 Network Connector USB Ports RS-232 Connector COM BACK VIEW VIEWSTATIONPower Input 100-240 VAC PS/2 Connectors Keyboard/Mouse Parallel Port Primary RJ-45 Network ConnectorINSTALLATION INSTALLATION GUIDELINES MOUNTING To install the unit into an equipment rack CONNECTIONS AND RECORDERS Figure 8. System ConnectionsALLOWS MULTIPLE VIEWSTATIONS MAXIMUM OF INTO THE BOTTOM RIGHT USB PORTWIRING ALARMS AND RELAYS POWER UP THE EQUIPMENT VIEWSTATION NETWORK CONFIGURATION PROGRAMMINGCHANGING THE VIEWSTATION’S IDENTIFICATION CHANGING THE VIEWSTATION’S IP ADDRESS AND SUBNET MASK 4. Click Properties. The following dialog box appears CHANGING THE RECORDER’S IDENTIFICATION TIME SYNCHRONIZATION SETTING DATE/TIME PROPERTIES CLIENT CONFIGURATION UTILITY 5. Select ÒStandard namingÓ or ÒCustom naming.Ó RECORDER INITIALIZATION OPTIONS 10. Click Configure 11. Restart all recorders and viewstations SERVER STATE Figure 28. Error Alert SymbolStatus DATABASE BACKUP AND REPAIR ADVANCED RECORDER OPTIONSDATABASE RESTORATION Figure 31. System Tray6. Click Yes. Start/Continue is enabled after several seconds Figure 35. Start/Continue Window 7. Exit the windowFigure 36. My Computer Window 9. Go to D\Databases. The following window appears Figure 37. Databases Window 10. Rename MSSQL to MSSQLoldFigure 38. Rename MSSQL 12. Copy the MSSQL folder and paste it to D\Databases 11. Go to C\Copy of D Drive\Databases. The following window appearsFigure 39. C Drive Databases Window Figure 40. MSSQL Folders 13. Delete MSSQLold14. Double-click the SQL server icon. The following window appears Figure 45. System Tray Figure 44. Restore Utility Dialog Box 23. Go to the system trayFigure 43. Explorer Windows 24. Double-click the SQL server icon. The following window appears Figure 46. Server Service Manager Window27. Click Yes. Start/Continue is enabled after several seconds 25. Click Stop. The following dialog box appears28. Select SQL Server Agent from the Services drop-down box Figure 54. Finished Scan Dialog Box CONFIGURING STANDARD ALARM AND RELAY PROPERTIES CAMERA RECORDING PROPERTIES To set or change camera recording propertiesFigure 58. Camera Properties Dialog Box Figure 59. Select Channel Dialog Box 3. Select a channel Figure 60. Continuous Recording Schedule PageCONTINUOUS RECORDING SCHEDULE DAILY RECORDING SCHEDULEFigure 62. Daily Event Recording Page To delete a time period 1. Click ÒNo record.Ó2. Click the box in the time bar WEEKLY RECORDING SCHEDULE MOTION DETECTION CHANNEL SETUP Parameter Description/ActionChannel Name DEFINING USERS Deleting a User Edit Existing UsersAdding a New User VideoI/O HANDLER ADVANCED FEATURESI/O INTERFACE I/O MANAGERCONNECTING AN ALARM UNIT ALARM UNIT CONFIGURATION 4. Click Open. The following dialog box appears I/O Manager for Alarm Unit Figure 75. Sample Configuration for External 1 Source 8. Click Next. The following dialog box appears CONNECTING A RELAY UNIT RELAY UNIT CONFIGURATION Page I/O Manager for Relay Unit 7. Select the event type to translate Figure 83. Dialog Box to Configure Relay Event Type6. Click Next. The following dialog box appears 8. Select ÒNo translation.Ó 9. Click OK and then FinishTo connect a CM9760-CC1 to a DX9100 recorder CONNECTING A CM9760-CC1Figure 84. Connecting a CM9760-CC1 CM9760-DTCONNECTING A CM6800 DATA TRANSLATOR CONFIGURATION 4. Click Open. The following dialog box appears I/O Manager for Data Translator Figure 91. Dialog Box to Configure Data Translator Event Type 7. Select the event type to translate 8. Select ÒNo translation.Ó8. Click OK and then Finish DVR MANAGEMENT DATA TRANSLATOR CONNECTIONSCONFIGURING THE DATA TRANSLATOR NOTE Once you complete programming, refer to the CM9760-MGR manual for instructions on macro programming for the matrix switcher. Individual macro commands must be customized within the CM9760-MGR software to switch the appropriate group of cameras to the monitors connected to the standby DX9100 RELAY UNIT CONNECTIONS CONFIGURING THE RELAY UNIT 6. Click Configure. The following dialog box appears FOREIGN LANGUAGE PROGRAMMING 4. Click Set Default. The following dialog box appears Electrical/Video SPECIFICATIONSRECORDER MechanicalInternal modem for use with pcAnywhere software only VIEWSTATIONElectrical Composite monitor port analog adapter providedManual # WARRANTY AND RETURN INFORMATIONREVISION HISTORY DateUSA & Canada Tel 800/289-9100 Fax 800/289-9150 International ISO9001World Headquarters 3500 Pelco Way Clovis, California 93612 USA Tel 1-559/292-1981 Fax 1-559/348-1120
Related manuals
Manual 104 pages 18.14 Kb

DX9100 specifications

The Pelco DX9100 is a versatile and robust digital video recorder (DVR) specifically designed for surveillance applications. Featuring innovative technologies and a user-friendly interface, the DX9100 provides an exceptional solution for security monitoring across various environments, including retail, commercial, and public spaces.

One of the primary features of the DX9100 is its high-definition video recording capability. The DVR supports multiple video formats, allowing the integration of various camera systems. With up to 16 channels of real-time recording, the DX9100 ensures that every critical moment is captured with clarity, offering resolutions that can reach up to 4CIF. This flexibility makes it suitable for diverse monitoring needs, from small installations to large-scale systems.

Another noteworthy characteristic of the DX9100 is its advanced compression technologies. Utilizing H.264 compression, the system optimizes bandwidth usage while maintaining high video quality. This ensures efficient storage solutions, enabling longer retention periods without compromising the clarity of recorded footage. Users can easily manage storage settings, enabling automatic overwrite capabilities, making the DX9100 both efficient and practical for ongoing surveillance.

The user interface of the DX9100 is designed with simplicity in mind, allowing operators to navigate through settings and playback with ease. The integrated graphical user interface (GUI) enables quick access to live feeds, recorded footage, and system settings. Additionally, the DVR supports remote viewing through Pelco’s Digital Sentry Client software and mobile applications, giving users the ability to monitor their premises in real-time from anywhere.

Moreover, the DX9100 offers robust alarm and event management features, allowing the system to respond promptly to security incidents. Users can configure alerts for motion detection and other predefined events, ensuring that any suspicious activity is immediately addressed.

In terms of connectivity, the DX9100 is equipped with various input and output options, such as alarm inputs, relay outputs, and extensive network support. This compatibility facilitates integration with other security systems, such as access control and intrusion detection, creating a comprehensive security infrastructure.

In summary, the Pelco DX9100 stands out as a powerful and reliable surveillance solution. Its combination of high-definition recording, advanced compression technologies, user-friendly interface, remote access capabilities, and extensive integration options makes it an ideal choice for security professionals seeking an efficient and scalable DVR for their monitoring needs.