OPENING THE CHASSIS
1.Make sure you protect the unit and its components, which are susceptible to damage from improper handling and ESD. Refer to the Safe Handling of Hard Drives document for more information.
2.Using a Phillips screwdriver, remove the chassis cover (refer to Figure 1):
a.Remove the top two screws on the left and right side panels of the DX8100.
b.Remove the four screws on the back of the unit that fasten the cover to the unit
c.Carefully remove the chassis cover by sliding it back and up. Set aside the cover.
Figure 1. Removing Chassis Cover
8 |