Pelco DX4104 Series Configuring a Remote Camera, Remote Camera Menu, Exit the camera menu/setting

CONFIGURING A REMOTE CAMERA

You can access a camera’s configuration menu using the PTZ OSD Menu controls or the PTZ control.

Remote Camera Menu

To access the camera menu:

1.On the toolbar, click the Live icon .

2.In the Client window, click the PTZ-enabled pane.

3.On the PTZ control, click Program . The camera menu appears.

Figure 22. Camera Configuration Menu

For Pelco cameras, click Set, 9, 5, and then click Preset. The camera menu appears.

4.To access menu commands and settings:

•Move up and down through the camera menu/display settings:

–Click the PTZ OSD Menu up and down button (refer to PTZ Control on page 16 for more information).

–Click FOCUS PLUS (+) and FOCUS MINUS (–).

•Make a menu a selection: Display a submenu or to move the cursor to the right, and then click IRIS PLUS (+).

•Cancel a menu selection: Cancel a selection or to move the cursor to the left, and then click IRIS MINUS (–).

•Exit the camera menu/setting:

–Click IRIS MINUS (-) to select EXIT or to move the cursor to the left.

–Click IRIS PLUS (+) to exit the camera menu.

34 C4632M (11/09)