Pelco C1602M installation manual Verify that the amount of RAM is now 512 MB. Refer to Figure

Page 17

4.Verify that the amount of RAM is now 512 MB. Refer to Figure 15.

4

Figure 15. System Properties Dialog Box

5.Click OK to exit the System Properties dialog box.

6.Go to Start > Programs > DX8000 to start the DX8000 application and return the unit to service.

C1602M (6/04)

15

Image 17

Contents DX8000-256RAM Installation Manual Page Introduction Parts ListGetting Ready Removing Power Cord from WallRemoving Power Cord from Unit ESD Protection Open the Unit Chassis Prepare Unit for RAM InstallationRemoving Chassis Cover Component Layout First Empty Dimm Socket Install the DX8000-256RAM Memory ModuleDimm Module and Dimm Socket Alignment Seating and Securing the Dimm Module Replacing Chassis Cover Reassemble the UnitProduct Label Restarting the Unit Windows 2000 Control Panel Double-click the System icon Verify Installation of New RAMVerify that the amount of RAM is now 512 MB. Refer to Figure C1602M 6/04 Product Warranty and Return Information ISO9001