Pelco C1602M installation manual Introduction, Parts List

Page 3

Introduction

The following instructions serve as a guide for the installation of the DX8000-256RAM memory expansion module.

PARTS LIST

Qty Description

1256 MB double data rate (DDR) dual inline memory module (DIMM)

1Adhesive-backed upgrade part label

Figure 1. 256 MB DIMM Module

TOOLS NEEDED

1Phillips-head screwdriver #1 (nonmagnetic)

1Properly grounded ESD wrist strap and mat

4Small containers for storing screws (optional)

C1602M (6/04)

1

Image 3

Contents DX8000-256RAM Installation Manual Page Introduction Parts ListGetting Ready Removing Power Cord from WallRemoving Power Cord from Unit ESD Protection Open the Unit Chassis Prepare Unit for RAM InstallationRemoving Chassis Cover Component Layout First Empty Dimm Socket Install the DX8000-256RAM Memory ModuleDimm Module and Dimm Socket Alignment Seating and Securing the Dimm Module Replacing Chassis Cover Reassemble the UnitProduct Label Restarting the Unit Windows 2000 Control Panel Double-click the System icon Verify Installation of New RAMVerify that the amount of RAM is now 512 MB. Refer to Figure C1602M 6/04 Product Warranty and Return Information ISO9001