Pelco C1629M-F manual Appendix C Replacing a Power Supply, Pull Handle

Page 39

Appendix C: Replacing a Power Supply

The DVR5300 incorporates two independent, hot-swappable power supplies. Each power supply acts as a redundant alternate for the other. This level of fault tolerance ensures that the DVR5300 is capable of sustaining uninterruptible operation, even if one power supply fails. If a power supply does fail, the hot-swap feature simplifies replacement without shutting down the unit or interrupting normal operation.

WARNING: If a power supply fails, replace it immediately. Operating the unit with only one active power supply eliminates the system’s fault tolerance.

Monitor the power supply indicators regularly to make sure that both power supplies are operating correctly. Check the following:

•The front panel unit status indicator is not red.

•The green indicator for each power supply is lit. If the indicator is red, the power supply must be replaced.

•Both fans in each power supply are operating.

NOTES:

•You can replace one failed power supply without shutting down the unit.

•No tools are required to replace this component.

To replace a power supply:

1.Review all instructions in this section before proceeding.

2.Identify the failed power supply. The status indicator will be red or dark.

3.Unplug the power cord from the failed power supply as follows:

WARNING: For safety, you must unplug the power cord from the wall socket or other power source before unplugging it from the failed power supply on the unit.

a.Unplug the power cord for the failed power supply from the power source.

b.Unplug the power cord from the failed power supply at the rear panel of the unit.

4.Using your thumb, lift the power supply latch while holding the pull handle.

PULL HANDLE

 

 

 

 

Text

 

 

 

REV

Sample

 

 

 

VOLTS

Text

 

-

 

 

Model

0020

 

 

Sample

39

 

 

 

-

 

 

 

 

03267

 

 

Text

 

 

 

AMPS

 

 

 

Sample

 

 

 

 

 

MODEL

SN

FREQ

50/60HZ

Audio/VideoApparatus

USA

IN

MADE

CA

CLOVIS,

PELCO,

BY

MFG

91KK

POWER POWER

SUPPLY SUPPLY

LATCH STATUS

INDICATOR

Figure 33. Releasing the Power Supply Latching Mechanism

5. Gently pull the failed power supply completely out of the unit.

C1629M-F (3/08)

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Endura DVR5300 Series Digital Video Recorder Page Contents List of Illustrations List of Tables Regulatory Notices Video Quality CautionFrame Rate Notice Regarding USER-SELECTED Options Description FeaturesModels Optional AccessoriesBefore You Begin Parts ListUser Supplied Parts Package ContentsShown Actual Size Application Scenarios Gigabit SwitchCM9700 Series Equipment Placement and Rack Mounting Product Serial Number Label PlacementUnpacking the DVR5300 Rack Mounting To install the DVR5300 in a rackFastening Mounting Brackets to Chassis Cage NUT Align FRONT-MOUNT Rail Rack Front Attaching Rack Rail Spacers Repeat for the second spacer Tightening the Thumbscrews Installing Hard Drive Carriers Hard Drive Array InstallationHard Disk Drive Carrier Installation C1629M-F 3/08 Connections Connecting PowerConnecting Video Encoders to the DVR5300 Connecting ENC5300 Series Video EncodersConnecting to the Network Endura Network Connecting Serial PTZ DevicesPIN Pin Powering UP the DVR5300 SystemOperation Front Panel Controls and IndicatorsUnit Startup You can shut down the DVR5300 in either of two ways Unit ShutdownAppendix a Expanding Video Storage Installing a Single SEB5100 Unit CableInstalling Multiple SEB5100 Units Switch Installing Additional SEB5100 Units Existing Switch Appendix B Replacing a Hard Drive Drive Number Label Close and lock the bezel cover Pull Handle Appendix C Replacing a Power SupplyCord Receptacle Connecting a UPS to a DVR5300 Appendix D Installing an Uninterruptible Power Supply UPSReplacing the Operating System Drive Appendix E Replacing the Operating System DrivePower Supply Problems Appendix F TroubleshootingSystem SpecificationsEnvironmental Page Product Warranty and Return Information ISO9001

C1629M-F specifications

The Pelco C1629M-F is a cutting-edge outdoor security camera designed to meet the demanding requirements of modern surveillance systems. Sleek in design yet robust in performance, this camera is engineered for reliability and versatility, suitable for a wide range of applications, including commercial security, residential monitoring, and public safety.

One of the standout features of the C1629M-F is its high-definition imaging capabilities. It employs advanced imaging technologies to deliver stunning video quality, enabling users to capture clear and precise footage even in challenging lighting conditions. With a resolution that can reach up to 1080p, security personnel can easily identify individuals and objects, providing a crucial asset for crime prevention and investigation.

Another significant characteristic of the Pelco C1629M-F is its superior low-light performance. Equipped with enhanced infrared technology, this camera can operate effectively in complete darkness, ensuring 24/7 monitoring capability. This feature is particularly valuable for outdoor settings, where nighttime visibility is essential for comprehensive surveillance.

The camera’s rugged build is designed to withstand various environmental challenges. With its IP66 weather rating, the C1629M-F is protected against dust and heavy rainfall, making it suitable for installations in diverse climates. The durable housing also offers resistance against tampering, helping to ensure the integrity of the device in public areas.

Connectivity is seamless with the C1629M-F, supporting various network protocols that facilitate integration into existing security systems. Whether utilizing an Ethernet connection for IP-based setups or leveraging advanced features for remote viewing, this camera ensures that users have access to real-time monitoring and playback capabilities from anywhere.

One of the key technologies integrated into the Pelco C1629M-F is intelligent video analytics. This includes features like motion detection and line crossing detection, which help to alert users to potential security breaches. Such proactive measures allow for quicker response times and enhance overall safety in monitored areas.

In summary, the Pelco C1629M-F is a sophisticated security camera that combines high-definition visuals, low-light functionality, and robust weatherproofing. With its intelligent technology features and reliable performance, it stands out as a valuable solution for anyone looking to enhance their security infrastructure.
Top Page Image Contents