Connecting to the Network

5.Apply a matching colored sticker (red, yellow, or blue) next to the USB connector on the DVR5300 rear panel. This identifies the USB cable (red, yellow, or blue) that should be connected to this ENC5300.

	USB “B”
	CONNECTOR
APPLY	ENC5300#3
BLUE
LABEL

	USB “B”
	CONNECTOR
APPLY	ENC5300 #2
YELLOW
LABEL

	USB “B”
	CONNECTOR
APPLY	ENC5300 #1
RED
LABEL

USB “A” CONNECTOR

Figure 21. Connecting ENC5300s to a DVR5300

6. Repeat steps 1 through 5 for the other ENC5300 units (if necessary).

When the ENC5300 units are first powered up, their unit status lights blink green until the DVR5300 recognizes them and puts them into service.

The DVR5300 Series recorder supports remote administration from a WS5000 Endura workstation. The DVR5300 is compatible with the entire family of Endura-ready devices using TCP/IP and UPnP protocols. Consult with your network administrator before installing the DVR5300 to avoid possible network conflicts.

The DVR5300 offers the following two network connectors on the rear panel:

•Primary network connector : Use this Gigabit Ethernet port to connect the DVR5300 to the Endura network. This is required for Endura operation.

•Secondary network connector : Use this Gigabit Ethernet port to expand the storage capacity of the DVR5300 with one or more

SEB5100 storage expansion boxes (refer to Appendix A: Expanding Video Storage on page 33).

NOTE: For best results, you should only implement an Endura system on a 1000Base-T network. Unless the Endura installation is very small with a dedicated Endura network, a 100Base-T network will not support the necessary data throughput requirements.

To connect the DVR5300 to the Endura network using a switched Gigabit Ethernet network:

1.Connect one end of an unshielded twisted pair (UTP) cable to the primary network connector on the DVR5300 rear panel. Use standard Cat5e or better UTP cable with RJ-45 connectors.

NOTE: Do not connect the UTP cable to the secondary network connector .

26	C1629M-F (3/08)

C1629M-F specifications

The Pelco C1629M-F is a cutting-edge outdoor security camera designed to meet the demanding requirements of modern surveillance systems. Sleek in design yet robust in performance, this camera is engineered for reliability and versatility, suitable for a wide range of applications, including commercial security, residential monitoring, and public safety.

One of the standout features of the C1629M-F is its high-definition imaging capabilities. It employs advanced imaging technologies to deliver stunning video quality, enabling users to capture clear and precise footage even in challenging lighting conditions. With a resolution that can reach up to 1080p, security personnel can easily identify individuals and objects, providing a crucial asset for crime prevention and investigation.

Another significant characteristic of the Pelco C1629M-F is its superior low-light performance. Equipped with enhanced infrared technology, this camera can operate effectively in complete darkness, ensuring 24/7 monitoring capability. This feature is particularly valuable for outdoor settings, where nighttime visibility is essential for comprehensive surveillance.

The camera’s rugged build is designed to withstand various environmental challenges. With its IP66 weather rating, the C1629M-F is protected against dust and heavy rainfall, making it suitable for installations in diverse climates. The durable housing also offers resistance against tampering, helping to ensure the integrity of the device in public areas.

Connectivity is seamless with the C1629M-F, supporting various network protocols that facilitate integration into existing security systems. Whether utilizing an Ethernet connection for IP-based setups or leveraging advanced features for remote viewing, this camera ensures that users have access to real-time monitoring and playback capabilities from anywhere.

One of the key technologies integrated into the Pelco C1629M-F is intelligent video analytics. This includes features like motion detection and line crossing detection, which help to alert users to potential security breaches. Such proactive measures allow for quicker response times and enhance overall safety in monitored areas.

In summary, the Pelco C1629M-F is a sophisticated security camera that combines high-definition visuals, low-light functionality, and robust weatherproofing. With its intelligent technology features and reliable performance, it stands out as a valuable solution for anyone looking to enhance their security infrastructure.