Pelco C4631M manual Network Menu, TCP/IP Setup

Page 42

NETWORK MENU

You must configure the DVR network settings to use the following features:

•Client software application: Allows you to operate and administer up to sixteen DX4104 servers. The DX4104 server supports up to five simultaneous connections when using the client and Web client applications. For more information about the remote client software application, refer to the DX4104 Client Operation/Configuration manual.

•Web client application: Allows you to use a Web browser to view live video and operate PTZ features of cameras attached to a DX4104. You can remotely monitor up to 16 cameras from the Web client application.

•Software update over the network: Allows you to update the server software over the network.

•Network Time Protocol (NTP): Allows you to use a public or private time server.

•Mail notification: Sends e-mail notification when an event is detected (alarm, motion, disk full, administrator password change, video loss, or when the unit is turned off and on).

•Emergency Agent: When the unit detects an event (alarm, motion, disk full, administrator password change, video loss, or the unit is turned off and on), a warning message is sent to the remote computer. The message displays for five seconds in the lower-right corner of the remote client PC screen.

The unit must be turned on and connected to a network, and you must be logged on at the administrator level, to configure network settings. You must restart the DVR for the network configuration changes to take effect. Therefore, do not change network settings unless unit recording can be interrupted.

TCP/IP SETUP

The unit by default is configured to use Dynamic Host Configuration Protocol (DHCP). If a DHCP server does not reside on your network, the unit allows you to use a static IP address. If the DHCP setting on the TCP/IP menu is set to OFF, you can configure the following settings:

•IP Address: Enter the static IP address (if used by your network).

•Subnet Mask: Enter the IP address of the subnet mask.

•Gateway: Enter the IP address for the Internet gateway server. On smaller systems, this will be the IP address of the DX4104. On larger systems, there might be a gateway server.

•Primary DNS Server: Enter the IP address of the primary Domain Name System (DNS) server that the DX4104 will use to convert names to IP addresses. If you are using the DDNS server, you do not need to enter a DNS server.

•Secondary DNS Server: Enter the IP address of the backup DNS server that the DX4104 will use. This server is used if the primary DNS server fails.

•TCP/IP Port: Enter the port number. The default port number is 9001.

•Web Server Port: Enter the port number that the Web client will use to communicate with the DX4104 over the Internet. The default port number is 80.

NOTE: If you use the Web client to access the unit and you change the port number, you must include the new port number with the IP address or the Web address. For example, the revised IP address would be http://192.168.0.40:8080, where 8080 is the revised port number.

•Bandwidth Throttle: Select the network bandwidth throttle to limit the amount of network resources allocated to client connections. The default bandwidth throttle is 100 Mbps.

To set up TCP/IP:

1.From the Setup menu, click Network.

2.Click TCP/IP.

3.Select the DHCP setting.

•ON: Use a DHCP server. Skip to step 5.

•OFF: Use static IP address settings. Continue with step 4.

4.Click the boxes to enter their settings.

5.Click Close.

6.Click OK.

42

C4631M (11/09)

Page 41 Page 43
Image 42
Page 41 Page 43
Contents DX4104 Series Digital Video Recorder C4631M 11/09 Contents Date and Time Setup NTP Setup Sound Setup User Account Setup List of Illustrations List of Tables Description Remote Client Software ApplicationsProduct Overview Application WindowGUI Toolbar PTZ Control ON-SCREEN Keyboard Unit Startup and Shutdown About Basic System DefaultsOperation Logging on and Logging OFFWorking in the Application Window Toolbar DisplayVideo Display Motion Area Selection Selecting a Motion AreaClearing a Motion Area Instant Recording and Playback Starting and Stopping Instant RecordInstant Playback Instant Playback ViewActivating Presets PTZ in Live ViewPTZ operation Preset Tours PTZ PresetsProgramming a Preset Clearing a PresetPTZ Patterns Accessing a Remote Camera MenuCopying and Exporting Video Programming a PatternSystem LOG List Acknowledging AN Alarm or Motion EventDisplay Video on the Main and Spot Monitor Main MonitorSystem Information PlaybackSearch Video DATE/TIME Search and PlaybackDST DATE/TIME Search and Playback Video Recorded Before and After DST ChangedEvent Search Video recorded before daylight saving endsBookmarking Playback Video Bookmark SearchBookmarking Instant Playback Video Searching and Playing Back Bookmarked VideoExporting Video Format MediaExport Video Configuration Setup MenuCamera Menu Camera MenuPTZ Mode Protocol Name Pan/Tilt Zoom Focus Iris Preset Tour SetupNormal Record Mode Resolution Image RateVideo Format Alarm Record Mode Motion Record Mode Instant Motion Record Mode Single-event recording Schedule MenuDaily Recording Schedule Multi-event recordingCopying Schedules Copying By Weekday, Weekend, DayHoliday Schedules Copying By ChannelCreating a Holiday Schedule Editing a Holiday Schedule Selecting a ScheduleDeleting a Holiday Schedule Editing a Holiday Recording Schedule Click Close Click OKDisplay Menu OSD ON-SCREEN DisplaySpot Channel Alarm Input Setup Motion Detection SetupLinking Menu Relay Output Setup Relay OffTCP/IP Setup Network MenuDdns Setup Notification SetupMail Setup Emergency Notification Setup Test E-mail Message Click OK, and then click CloseDate and Time Setup System MenuNTP Setup Sound SetupUser Account Setup Operation User LevelChanging a User Adding a New UserUpdate Software Deleting a UserUpdating from a USB Device Hard Disk Storage Allocation Setup Updating Over the NetworkCustomizing HDD Recording Settings Formatting the System DrivesOverwrite Backup Schedule Setup Media GuidelineInstant Backup Instant Backup Status Information Click OK Weekly Backup Schedule Daily Backup Schedule Schedule DailyErasing and Formatting Media System IR Remote IDAuto User Logout Import Settings Export/Import Configuration SettingsExport Settings Reset Unit to Factory DefaultsAppendix a DX4104 Factory Defaults AppendicesSchedule Linking NetworkTLS SystemSystem S/W Procedure Task Mouse Remote Control Keypad or Front Panel ControlAppendix B DX4104 Operation Methods Appendix C Hardware and Software Upgrade Policy Hardware UpgradesSoftware Upgrades Appendix D Recovering the Administrator Password Product Warranty and Return Information

C4631M specifications

The Pelco C4631M is a high-performance camera designed for a wide range of surveillance applications. This versatile camera combines advanced imaging technology, robust design, and user-friendly features, making it suitable for both indoor and outdoor environments.

One of the main features of the Pelco C4631M is its high-resolution imaging capability. It supports up to 1080p HD video quality, delivering clear and detailed images for effective monitoring. The camera utilizes a progressive scan CMOS sensor, which enhances its ability to capture moving subjects without motion blur, ensuring that critical moments are accurately recorded.

The C4631M is equipped with a powerful optical zoom lens that provides a 31x optical zoom capability. This allows users to zoom in on distant objects while maintaining clarity and detail. The lens is complemented by a digital zoom function, giving users additional flexibility to capture specific areas of interest.

In terms of low-light performance, the Pelco C4631M excels with its infrared (IR) capabilities. The camera can capture high-quality images in low-light conditions, thanks to its built-in IR illumination. This feature ensures reliable surveillance around the clock, even in complete darkness.

Another notable characteristic of the C4631M is its advanced video analytics capabilities. The camera supports features such as motion detection, line crossing detection, and intrusion detection. These intelligent analytics help to enhance security by alerting users to potential threats in real time.

Pelco has also integrated network connectivity into the C4631M, making it easy to connect to existing surveillance systems. The camera supports various network protocols, allowing for seamless integration with video management software. This versatility enables users to manage and analyze video feeds from multiple cameras, enhancing situational awareness.

The C4631M features a rugged and durable design, making it suitable for outdoor environments. It is weather-resistant and built to withstand harsh conditions, ensuring long-term reliability. The camera also offers flexible mounting options, allowing for easy installation in various locations.

In summary, the Pelco C4631M is a robust surveillance solution characterized by its high-resolution imaging, powerful zoom capabilities, low-light performance, and intelligent analytics. These features, combined with its durable design and network connectivity, make the C4631M an ideal choice for comprehensive security monitoring across various applications. Whether for commercial, industrial, or residential use, this camera delivers the performance and reliability needed to maintain a secure environment.
Top Page Image Contents