Pelco C4631M manual Ddns Setup, Notification Setup, Mail Setup

Page 43

DDNS SETUP

The DDNS feature uses the services provided by No-IP™. Prior registration with No-IP to obtain a user name and password is required before configuring the DVR.

The DDNS feature uses port 8245 provided by No-IP. If the DVR is installed in a network that has a firewall, port 8245 has to be open to allow DDNS data to get through the firewall. For information about setting up the firewall, refer to your network administrator or network service provider. The unit allows you to configure the following DDNS settings:

•User Name: Assigned the DDNS server provider during registration.

•Password: User password. Assigned the DDNS server provider during registration.

•Host Name: Obtained from the DDNS server provider.

To set up DDNS:

1.From the Network menu, click DDNS.

2.Click the boxes to enter their settings.

3.Click Update. The system searches for and registers the unit with the DDNS server.

4.Click OK, and then click Close.

NOTIFICATION SETUP

The notification feature has the following guidelines if the setting is ON:

•Alarm: Sends an alarm notification in response to an alarm event.

•Motion: Sends a motion notification in response to a motion event.

•Disk full: Sends a disk full notification if the Hard Disk Overwrite setting is not set to OFF.

•Admin password changed: Sends an administrator 01 ID notification in response to a change to the 01 ID administrator password. Changing the password of additional users assigned administrator-level permission will not initiate a notification message.

•Video loss: Sends a video loss notification in response if video loss is detected on any channel.

•Power on/off: Sends a power loss notification in response to the DX4104 power being turned off.

To set up notification:

1.From the Network menu, click Notification.

2.Click the boxes to enter their settings.

3.Click OK, and then click Close.

4.Click OK again.

MAIL SETUP

The mail feature sends an e-mail text notification to all designated users when an event is detected. Use the notification option to configure an event to trigger an e-mail notification. For information about configuring the notification option, refer to Notification Setup on page 43.

The mail feature is configured and operates independently of the emergency agent feature. For information about setting up the emergency notification feature, refer to Emergency Notification Setup on page 44.

The unit allows you to configure the following mail settings:

•Notification: Turns the notification feature on and off.

•TLS: Select ON to use the Transport Layer Security (TLS) feature. By default, TLS is not enabled.

•SMTP Server: Enter the Simple Mail Transfer ProtocolS (MTP) server IP address or host name. Supports up to 24 characters including 0.0.0.0 to 255.255.255.255, a to z, A to Z, numerals 0 to 9, and special characters.

•SMTP Port No.: Enter the SMTP port. The default TCP/IP port used for SMTP is 25. Supported values are 25 and 1025 to 65535.

•User Name: Name of user to be notified. Supports up to 24 characters including 0.0.0.0 to 255.255.255.255, a to z, A to Z, numerals 0 to 9, and special characters.

•Password: User password. Supports up to 24 characters including a to z, A to Z, numerals 0 to 9, and special characters.

C4631M (11/09)

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents DX4104 Series Digital Video Recorder C4631M 11/09 Contents Date and Time Setup NTP Setup Sound Setup User Account Setup List of Illustrations List of Tables Remote Client Software Applications DescriptionApplication Window Product OverviewGUI Toolbar PTZ Control ON-SCREEN Keyboard Logging on and Logging OFF About Basic System DefaultsOperation Unit Startup and ShutdownToolbar Display Working in the Application WindowVideo Display Selecting a Motion Area Motion Area SelectionClearing a Motion Area Starting and Stopping Instant Record Instant Recording and PlaybackInstant Playback View Instant PlaybackPTZ in Live View Activating PresetsPTZ operation Clearing a Preset PTZ PresetsProgramming a Preset Preset ToursProgramming a Pattern Accessing a Remote Camera MenuCopying and Exporting Video PTZ PatternsMain Monitor Acknowledging AN Alarm or Motion EventDisplay Video on the Main and Spot Monitor System LOG ListPlayback System InformationDATE/TIME Search and Playback Search VideoVideo Recorded Before and After DST Changed DST DATE/TIME Search and PlaybackVideo recorded before daylight saving ends Event SearchSearching and Playing Back Bookmarked Video Bookmark SearchBookmarking Instant Playback Video Bookmarking Playback VideoFormat Media Exporting VideoExport Video Setup Menu ConfigurationCamera Menu Camera MenuProtocol Name Pan/Tilt Zoom Focus Iris Preset Tour Setup PTZ ModeResolution Image Rate Normal Record ModeVideo Format Alarm Record Mode Motion Record Mode Instant Motion Record Mode Multi-event recording Schedule MenuDaily Recording Schedule Single-event recordingCopying By Weekday, Weekend, Day Copying SchedulesCopying By Channel Holiday SchedulesCreating a Holiday Schedule Selecting a Schedule Editing a Holiday ScheduleEditing a Holiday Recording Schedule Click Close Click OK Deleting a Holiday ScheduleOSD ON-SCREEN Display Display MenuSpot Channel Motion Detection Setup Alarm Input SetupLinking Menu Relay Off Relay Output SetupNetwork Menu TCP/IP SetupNotification Setup Ddns SetupMail Setup Test E-mail Message Click OK, and then click Close Emergency Notification SetupSystem Menu Date and Time SetupSound Setup NTP SetupOperation User Level User Account SetupAdding a New User Changing a UserDeleting a User Update SoftwareUpdating from a USB Device Updating Over the Network Hard Disk Storage Allocation SetupFormatting the System Drives Customizing HDD Recording SettingsOverwrite Media Guideline Backup Schedule SetupInstant Backup Instant Backup Status Information Click OK Weekly Backup Schedule Schedule Daily Daily Backup ScheduleErasing and Formatting Media IR Remote ID SystemAuto User Logout Reset Unit to Factory Defaults Export/Import Configuration SettingsExport Settings Import SettingsAppendices Appendix a DX4104 Factory DefaultsSchedule Network LinkingSystem TLSSystem S/W Task Mouse Remote Control Keypad or Front Panel Control ProcedureAppendix B DX4104 Operation Methods Hardware Upgrades Appendix C Hardware and Software Upgrade PolicySoftware Upgrades Appendix D Recovering the Administrator Password Product Warranty and Return Information

C4631M specifications

The Pelco C4631M is a high-performance camera designed for a wide range of surveillance applications. This versatile camera combines advanced imaging technology, robust design, and user-friendly features, making it suitable for both indoor and outdoor environments.

One of the main features of the Pelco C4631M is its high-resolution imaging capability. It supports up to 1080p HD video quality, delivering clear and detailed images for effective monitoring. The camera utilizes a progressive scan CMOS sensor, which enhances its ability to capture moving subjects without motion blur, ensuring that critical moments are accurately recorded.

The C4631M is equipped with a powerful optical zoom lens that provides a 31x optical zoom capability. This allows users to zoom in on distant objects while maintaining clarity and detail. The lens is complemented by a digital zoom function, giving users additional flexibility to capture specific areas of interest.

In terms of low-light performance, the Pelco C4631M excels with its infrared (IR) capabilities. The camera can capture high-quality images in low-light conditions, thanks to its built-in IR illumination. This feature ensures reliable surveillance around the clock, even in complete darkness.

Another notable characteristic of the C4631M is its advanced video analytics capabilities. The camera supports features such as motion detection, line crossing detection, and intrusion detection. These intelligent analytics help to enhance security by alerting users to potential threats in real time.

Pelco has also integrated network connectivity into the C4631M, making it easy to connect to existing surveillance systems. The camera supports various network protocols, allowing for seamless integration with video management software. This versatility enables users to manage and analyze video feeds from multiple cameras, enhancing situational awareness.

The C4631M features a rugged and durable design, making it suitable for outdoor environments. It is weather-resistant and built to withstand harsh conditions, ensuring long-term reliability. The camera also offers flexible mounting options, allowing for easy installation in various locations.

In summary, the Pelco C4631M is a robust surveillance solution characterized by its high-resolution imaging, powerful zoom capabilities, low-light performance, and intelligent analytics. These features, combined with its durable design and network connectivity, make the C4631M an ideal choice for comprehensive security monitoring across various applications. Whether for commercial, industrial, or residential use, this camera delivers the performance and reliability needed to maintain a secure environment.
Top Page Image Contents