Programming the Remote Control
5
3
4
The remote control is preset to operate Sony brand
video | equipment. |
|
|
|
Sony | Equipment | Programmable | Code Number | |
DVD | VCR | 701 | (Sony Dream | System) |
SAT | Cable | 801 | (Satellite Cable Box) |
If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the tbllowing procedures to program the remote control.
Note
The equipment nmst have infrared (IR) remote capability in order to be used with this remote control.
From the "Manut:acturer's codes" listed on page 15, select the
manut:acturer's code of your equipment. If more than one code number is listed, try entering them one by one until you come to the correct code lbr your equipment. Use the code number to complete the following procedure.
1 Press the DVD/VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/
CABLE (FUNCTION) and RESET buttons simultaneously.
2Press the function button you want to program.
To program a cable box or a satellite receiver Press SAT/CABLE (FUNCTION).
To program video equipment Press DVD/VCR (FUNCTION).
3Enter the
4Press ENT (enter).
5To check if the code number works, aim the TV's remote control at the equipment and press DVD/VCR and/or SAT/CABLE (POWER) that corresponds with that equipment. If it responds,
the programming is completed. If not, try using the other codes listed tbr that manut:acturer.
Tips
•If you enter a new code number, the code number you
previously entered at that setting is erased.
•In some rare cases, you may not be able to operate your
equipment with the Sony remote control. In this case, use the
equipment's own remote control unit.
14