CAUTION
Use the following SONY appliance(s) only" with the following WALL- MOUNT BRACKET. Use with other
SONY APPLIANCE MODEL NO.
SONY
MODEL NO.
To Customers
Sufficient expertise is required for installing the specified product. Be sure to subcontract the installation to Sony dealers or contractors and pay adequate attention to safety during the installation.
As an ENEROYSTAR® Partner, Son)' Corporation has determined that this product meets the E_ERC_STARsY
guidelines for energy efficiency.
ENERGYSTAR ENERGYSTAR_ is a U.S. registered mark.
Trademark Information
TruSnrronnd. TrnBass SRS and the (O) sylnbol are trademarks of SRS Labs. Inc. TruSurrotmd teclmology is incorporated under license from SRS Labs, Inc.
Licensed by BBE Sound. Inc. under USP4638258, 4482866. "BBE" and BBE symbol are trademarks of BBE Sound, Inc.
Hrn I This TV incorporates
HDMI, the HDMI logo and
Wega, Stea@ Sonnd, Digital Reality Creation, Caption Vision, and CineMotion are registered trademarks of Sony" Corporation.
Important
Safeguards
Before using your TV, please read these instructions completely, and keep this mannal for furore reference.
Carefully observe and comply with all warnings, cautions and
ins_uctions placed on the set or described in the operating instructions or service manual.
WARNING
To guard against injury the following basic safety precautions should be observed in the installation, use and servicing of the set.
Use
Power Sources
This set should be operated only from the type of power sonrce indicated on the serialilnodel plate. If you arc not snre of the type of electrical power supplied to your home, consult vonr dealer or local power company. For those sets designed to operate
from battel) power, refer to the operating instructions.
Grounding or Polarization
This set is equipped with a polarized AC power cord plug (a plug having one blade wider than the other), or with a
For the set with a polarized AC power cord plug
This plug will fit into the power outlet only one way. This is a safety featnre. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact yonr electrician to
have a suitable outlet installed. Do not dd'eat the safety ptu'pose of the polarized plug by forcing it in.
Wall outlet
Do not use a poor fitting ontlet.
Insert the plug fully into the outlet. If it is loose, it may cause arcing and result in fire.
Contact your electrician to have the outlet changed.
Wiring
Unplug the AC power cord when wiring cables.
Be sure to unplug the AC power cord for your safety', when hooking up.
Electric Shock
Do not tonch the AC power cord or the unit with a wet hand.
If you plug/unplug the AC power cord from the unit with a wet hand, it may cause electric shock.
Cleaning
Clean the AC power plug regularly.
If the plug is covered with dust and it picks tip moisture, its insulation may deteriorate and result in fire. Unplug the AC power plug and clean it regularly.