Marantz MV8300_U1B Access Main Menu screen Press Menu, Return to normal screen Press Menu, Guide

EN 37

1 Access Main Menu screen Press MENU.

2	Access Guide Channel Set screen
	1 Press @ # move	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
	the arrow to	CLOCK SET		GUIDE CHANNEL	OTHER
	“INITIAL SET	GUIDE CH		6
		VCR CH		– –
	UP”, then press fi
	or OK.
	2 Press @ # to move	MENU	OK	SELECT WITH ARROW KEYS
	the arrow to	EXIT	SELECT	THEN PRESS [OK]

“GUIDE

CHANNEL”, then press fi or OK.

Input guide channel number
3 Press @ # to input the	(Ex.) When inputting the
VCR Plus+ guide	guide channel number 6
channel number as	for WNJU(Ind.)
shown in the TV	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
	CLOCK SET		GUIDE CHANNEL	OTHER
listing.
	GUIDE CH
● If you receive your			6
	VCR CH		– –
channels with a
cable box and if
you have properly	MENU	OK	SELECT WITH ARROW KEYS
	EXIT	SELECT	THEN PRESS [OK]
set your Controller,

“CABLE CH” appears in place of “VCR CH”. If not, refer to pages 15 – 17 and re-perform the procedure.

In that case, it is possible to change the channel by 10 channels by pressing and holding @ # in steps 3 and 4.

HM-DH40000U-EN34-4137

Input receiving channel number
4 Press %fi to move	(Ex.) If WNJU(Ind.) is
the arrow to “VCR	received on channel 47
CH”, then press @ #	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
to input the number	CLOCK SET		GUIDE CHANNEL	OTHER
of the channel on	GUIDE CH		6
	VCR CH		47
which the guide
channel’s broadcasts
are received.	MENU	OK	SELECT WITH ARROW KEYS
● Repeat steps 3 and	EXIT	SELECT	THEN PRESS [OK]

4for each instance.

5 Return to normal screen Press MENU.

1/23/3, 5:22 PM