Marantz MV8300_U1B manual  S-Vhs Et

Page 59

 

EN 59

 

* The default setting is bold in the table below.

 

 

 S-VHS ET

This function allows you to record on VHS tapes with S-VHS picture quality. Tapes

ON

recorded using this function can be played back on a VCR equipped with the S-VHS ET

OFF

function. The S-VHS indicator lights up on the front display panel when “S-VHS ET” is set

 

to “ON”.

 

NOTES:

 

● Before recording, make sure that “V. CALIBRATION” is set to “ON” ( pg. 54).

 

● You cannot activate the S-VHS ET function...

 

– while recording is in progress.

 

– while timer-recording or Instant Timer Recording ( pg. 28) is in progress.

 

– while Video Calibration ( pg. 54) is in progress.

 

● S-VHS ET does not work with S-VHS tapes.

 

● To keep the highest quality recording and playback pictures over a long period of time, S-VHS recording

 

on S-VHS tapes is recommended.

 

● Use of high grade tapes are recommended for S-VHS ET recordings.

 

On some tapes, picture quality will not improves even if the S-VHS ET function is used. Check the

 

recording quality before you start important recordings.

 

● You can play back S-VHS ET recordings on most of S-VHS VCRs and of VHS VCR equipped with SQPB

 

(S-VHS QUASI PLAYBACK) function. (Notice some VCRs are not compatible with this function.)

 

● While playing back a tape recorded with this function on some tapes, noise may appear. (If playback

 

picture becomes blurred or interrupted, use a cleaning cassette.)

 

● During special effect playback ( pg. 31), noise may appear. If special effect playback is performed

 

frequently on a tape recorded with this function, the tape may be damaged and picture may be

 

deteriorated.

 

 

 DISPLAY

When this function is set to “OFF”, only “:” appears on the front display panel.

ON

NOTE:

OFF

Even if you set “DISPLAY” to “OFF”, each item appears on the front display panel in the following

 

 

cases;

 

● when the timer-recording is in progress/in the timer standby mode ( pg. 34 – 41)

 

● in the satellite Auto Recording standby mode ( pg. 62)

 

● during Plug & Play setting ( pg. 9)

 

● when you press REC ( ) twice for the ITR ( pg. 28)

 

● when you set the remote control code ( pg. 71)

 

● when you press DISPLAY, the current status appears for a few seconds.

 

 

HM-DH40000U-EN53-63

59

1/22/3, 5:45 PM

Page 58 Page 60
Image 59
Page 58 Page 60
Contents MV8300/U1B Dear Customer Grounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesDamage Requiring Service CleaningDo not block the VCR’s ventilation openings or holes About Head CleaningContents Basic Connection Check contentsConnect VCR to power source ConnectionsVideo Connection Information Plug & Play SettingPerform Plug & Play setup What to do if Plug & Play setting failedPreparations Clock SettingAccess Main Menu screen 10 ENSelect time zone Setting clock semiautomaticallyAccess Auto Clock Set screen Select D.S.T. modeSet date Setting clock manuallyAccess Manual Clock Set screen 12 ENPerform Auto Channel Set Tuner SettingSetting channels automatically Access Tuner Set Up screenAdd or skip desired channels Setting channels manuallyAccess Manual Channel Set screen 14 ENConnect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerTurn on cable box Access Main Menu screen on VCR16 EN Select cable box input channelEnter cable box brand Engage test modeAntenna Video How to control the DBS receiver18 EN Connect DBS receiver to VCRInput CH Access DBS Receiver Set screenTurn on DBS receiver Select DBS receiver input channelControl is on 20 ENEnter DBS Receiver’s brand DBS ReceiverStart playback Basic PlaybackLoad a cassette Checking tape position Playback FeaturesBasic 22 ENEliminate the noises on the TV screen Adjusting tracking conditionSelecting monitor sound Activate manual trackingLocating beginning 24 ENAutomatic operations after Skipping unwanted portionsTitle Program SelectionAngle Selection Subtitle SelectionVHS Recording RecordingTo pause recording Compatibility Of Cassettes And Recording ModeTo fast-forward the tape when it is not running VHS/VHS RecordingSpecifying recording length Basic Recording Features28 EN Changing display informationShowing on-screen display Watching one program while recording anotherAccidental erasure prevention Record safety tab30 EN Other useful functions for recordingRapidly Picture Search High-Speed Picture Search Special Effect PlaybackLocating particular scene PlayPause during playback 32 ENViewing still picture Viewingframe still picture frame byDuring normal playback Viewing slow motion pictureCH + Play Pause Slow Motion Playback S-VHS/VHS only34 EN VCR Plus+ Timer ProgramingAccess VCR Plus+ screen Check program data Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching Changing VCR Plus+ Setting36 EN Input receiving channel number Access Main Menu screen Press MenuAccess Guide Channel Set screen Return to normal screen Press MenuSet program stop time Express Timer ProgramingAccess VCR PLUS+ screen Press Program 38 ENDBS To timer-record daily or weekly serialsCatv 40 EN Checking program settingsPattern Other Useful functions for timer recordingSelect program Access Video Navigation screenNavigation Playback 42 ENArrow to NAVI. SET Deactivating Video NavigationDeactivate Video Navigation Press %fi @ # to moveFinding by tape number Finding Tapes44 EN Confirm lists Finding by program titleFinding by category Press @ # to move Arrow to DATE, then 46 ENFinding by recording date 4,6Prepare for recording Finding blank spaceSet condition Select blankEditing tape title CancelEditing Titles 48 ENEx. Enter JVC News Enter titleEntering or Editing program Editing program category Title 50 EN5 B -2,6 Access delete screenDeleting tape information Delete tape informationCheck memory 52 ENDeleting program information Checking memorySelect Function Menu Useful Function SettingsAccess Function Set Up screen Change setting Digital R3 S-VHS/VHS only Video settings Video Function54 EN This VCR Audio settings Audio FunctionWhen this function is set to on StandardNo Conv 56 EN720to1080 For Example Additional settings AdditionalWhen this function is set to OFF Pause OUT Link VCR only AV Compulink When this function is set to OFF, you can record on D-VHS58 EN  S-VHS ET 60 EN Link Set UpLink set up for connected device Link Connection Examples What is i.LINK?Link Connection Link Branched Connection62 EN Set timer program on DBS receiverEngage Satellite Auto Recording standby Mode Make sure the record safety tab is intactDesired ID number Set Jlip ID NumberJlip ID 64 EN LINK/DV ConnectionsConnection with the VCR Make connectionsSelect input location on this VCR Connection with the camcorderCamcorder VIDEO/ Video Connections66 EN Various connection for editing tapesInput Source To use a Master Edit Control-equipped JVC camcorderOn the front panel Press Channel + On the Remote TV/VCR CH +68 EN TV Brand SettingOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand code70 EN Brand SettingDBS Receiver Turn off VCR Changing Remote Control CodeSet remote control code for Remote Check remote control code for VCR72 EN TroubleshootingRecording 74 EN Video Navigation 76 EN Other ProblemsImage or sound is distorted Playback of tapes recorded in D-VHS modeSearching images on D-VHS tapes Picture stops/There is no sound78 EN Error Codes and MessagesWhat happens if the tape reaches its end during recording? ‰ remain lit on the front display panel Is there a problem?Can the VCR indefinitely remain in still mode? Dolby Digital 80 ENDigital Broadcasts and D-VHS Linear PCM AudioList of terms Front panel 82 ENOUT Rear panelFront display panel 84 ENOn-screen display 86 EN How to use the RemoteUHF Linear PCM HS/STDVHF 88 EN HOW to Locate Your JVC Service CenterLimited Warranty Memo 90 ENHM-DH40000U-EN72-91 22/3, 544 PM MV8300/U1B

MV8300_U1B specifications

The Marantz MV8300_U1B is a state-of-the-art component that exemplifies high-fidelity audio reproduction, tailored for music enthusiasts who appreciate both quality and craftsmanship. As part of Marantz's esteemed line of audio products, the MV8300_U1B combines advanced technology with practical usability, making it a standout choice for home theater setups and dedicated audio systems.

One of the most notable features of the MV8300_U1B is its exceptional power output, capable of delivering a robust performance that effortlessly drives demanding speakers. With a substantial total harmonic distortion rating, the amplifier ensures that the audio signal remains clean and undistorted, allowing listeners to experience music as it was intended by the artists. The unit's power rating makes it suitable for various settings, whether for intimate listening experiences or grand home theater presentations.

Incorporating advanced class D amplification, the MV8300_U1B achieves high efficiency without compromising sound quality. This technology allows for a more compact design while still providing significant power reserves, resulting in impressive dynamic range and clarity. The amplifier is engineered to produce an immersive soundstage with detailed imaging, providing listeners with a unique auditory experience.

Connectivity options are plentiful on the MV8300_U1B, including multiple line inputs for versatile integration with various audio sources. The unit also features built-in DAC capabilities, allowing for the conversion of high-resolution digital audio formats, which adds convenience for those who stream music and use digital devices. With Marantz's commitment to quality craftsmanship, the MV8300_U1B is built using premium components, further enhancing its performance and reliability.

The design of the MV8300_U1B reflects Marantz's dedication to aesthetics as well as functionality. Its sleek, modern appearance is characterized by a minimalist front panel, intuitive controls, and LED indicators that provide clear feedback. The robust construction not only contributes to its durability but also helps minimize vibration, ensuring that audio performance remains unaffected.

Additionally, the MV8300_U1B includes advanced thermal management systems that prevent overheating, allowing for continuous operation during long listening sessions. This ensures that the amplifier maintains its performance and longevity, providing owners with a reliable audio solution for years to come.

In conclusion, the Marantz MV8300_U1B is an excellent choice for audiophiles seeking a powerful amplifier that combines cutting-edge technology with superb audio reproduction. Its impressive features, robust build quality, and aesthetic appeal make it an ideal addition to any serious audio setup.
Top Page Image Contents