Marantz MV8300_U1B manual 54 EN, Video settings Video Function,  Digital R3 S-VHS/VHS only

Page 54

54 EN

OTHER USEFUL FUNCTIONS (cont.)

Video settings [VIDEO FUNCTION]

* The default setting is bold in the table below.

 V. CALIBRATION

When this function is set to “ON”, this VCR checks the condition of the

(S-VHS/VHS only)

tape in use during playback and recording, and compensates to provide

the highest-possible pictures. This takes place whenever you play back a

ON

tape or start recording after inserting a tape.

OFF

NOTES:

 

 

 

 

During playback, this function is always working even though

 

“VIDEO CALIBRATION” appears just at the beginning of automatic tracking.

 

During recording, this function works only for the first SP recording and the first

 

EP recording on an inserted tape.

 

For timer recording, this function checks the tape condition both for the SP

 

recording and the EP recording before the first timer recording starts.

 

When you play back rental tapes or tapes recorded on other VCRs, set this

 

function either “ON” or “OFF” whichever gives you the best picture.

 

 

 PICTURE CONTROL

This function helps you to adjust the playback picture quality according

(S-VHS/VHS only)

to your preference.

AUTO:

Normally select this. Picture quality is adjusted

AUTO (NORM)

(NORM)

automatically.

EDIT

 

When “V. CALIBRATION” is “OFF”, “NORM” will appear

SOFT

 

 

instead of “AUTO”. The quality is not adjusted

SHARP

 

 

automatically when “NORM” appears.

 

 

 

EDIT:

Minimizes picture degradation during editing (recording

 

 

and playback).

 

SOFT:

Reduces image coarseness when viewing overplayed tapes

 

 

containing much noise.

 

SHARP: Clearer, sharper-edged picture when viewing images with

 

 

much flat, same-colored surfaces such as cartoons.

 

NOTES:

 

 

When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not

 

change until you select again.

 

Select “EDIT” when you are editing tapes ( pg. 67). After you finish editing the

 

tapes, select “AUTO” (“NORM” when “V. CALIBRATION” is “OFF”.)

 

 

 DIGITAL R3 (S-VHS/VHS only)

When this function is set to “ON”, edge correction to the luminance signal

ON

is performed to enhance details. Normally set this function to “ON”.

OFF

NOTES:

 

 

 

 

Depending on the type of tape being used, picture quality may be better with

 

“DIGITAL R3” set to “OFF”.

 

If you use this VCR as the playback VCR for editing, be sure to set “DIGITAL

 

R3” to “OFF” before starting.

 

 

 VIDEO STABILIZER

When this function is set to “ON”, you can correct vertical vibrations in

(S-VHS/VHS only)

the picture when playing back unstable recordings made on another

VCR.

 

ON

 

This function is available only when playing back tapes recorded in EP mode.

OFF

NOTES:

 

 

 

 

When you finish viewing a tape, be sure to set this function to “OFF”.

 

Regardless of the setting, this function has no effect during recording and during

 

special effects playback.

 

To watch recordings with close-caption, set this function to “OFF”.

 

When this function is set to “ON”, the vertical vibrations may occur. Press

 

CHANNEL + or on the VCR (or TV/VCR CH + or on the Remote) to

 

eliminate vibration.

 

 

 

HM-DH40000U-EN53-63

54

1/22/3, 5:45 PM

Image 54
Contents MV8300/U1B Dear Customer Power Lines Power SourcesPower Cord Protection Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsAbout Head Cleaning Do not block the VCR’s ventilation openings or holesContents Connections Check contentsConnect VCR to power source Basic ConnectionVideo Connection What to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Information10 EN Clock SettingAccess Main Menu screen PreparationsSelect D.S.T. mode Setting clock semiautomaticallyAccess Auto Clock Set screen Select time zone12 EN Setting clock manuallyAccess Manual Clock Set screen Set dateAccess Tuner Set Up screen Tuner SettingSetting channels automatically Perform Auto Channel Set14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsAttach Controller Cable Box Control SettingSituate Controller Connect cable box to VCRSelect cable box input channel Access Main Menu screen on VCR16 EN Turn on cable boxEngage test mode Enter cable box brandConnect DBS receiver to VCR How to control the DBS receiver18 EN Antenna VideoSelect DBS receiver input channel Access DBS Receiver Set screenTurn on DBS receiver Input CHDBS Receiver 20 ENEnter DBS Receiver’s brand Control is onBasic Playback Load a cassetteStart playback 22 EN Playback FeaturesBasic Checking tape positionActivate manual tracking Adjusting tracking conditionSelecting monitor sound Eliminate the noises on the TV screenSkipping unwanted portions 24 ENAutomatic operations after Locating beginningSubtitle Selection Program SelectionAngle Selection TitleRecording VHS RecordingVHS/VHS Recording Compatibility Of Cassettes And Recording ModeTo fast-forward the tape when it is not running To pause recordingChanging display information Basic Recording Features28 EN Specifying recording lengthWatching one program while recording another Showing on-screen displayOther useful functions for recording Record safety tab30 EN Accidental erasure preventionPlay Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchViewingframe still picture frame by 32 ENViewing still picture Pause during playbackSlow Motion Playback S-VHS/VHS only Viewing slow motion pictureCH + Play Pause During normal playbackVCR Plus+ Timer Programing Access VCR Plus+ screen34 EN Input receiving channel number Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Check program dataChanging VCR Plus+ Setting 36 ENVCR Plus+ guide channel matching Return to normal screen Press Menu Access Main Menu screen Press MenuAccess Guide Channel Set screen Input receiving channel number38 EN Express Timer ProgramingAccess VCR PLUS+ screen Press Program Set program stop timeTo timer-record daily or weekly serials CatvDBS Checking program settings 40 ENOther Useful functions for timer recording Pattern42 EN Access Video Navigation screenNavigation Playback Select programPress %fi @ # to move Deactivating Video NavigationDeactivate Video Navigation Arrow to NAVI. SETFinding Tapes 44 ENFinding by tape number Finding by program title Finding by categoryConfirm lists 4,6 46 ENFinding by recording date Press @ # to move Arrow to DATE, thenSelect blank Finding blank spaceSet condition Prepare for recording48 EN CancelEditing Titles Editing tape titleEnter title Ex. Enter JVC News50 EN Entering or Editing program Editing program category TitleDelete tape information Access delete screenDeleting tape information 5 B -2,6Checking memory 52 ENDeleting program information Check memoryChange setting Useful Function SettingsAccess Function Set Up screen Select Function MenuVideo settings Video Function 54 EN Digital R3 S-VHS/VHS only Standard Audio settings Audio FunctionWhen this function is set to on This VCR56 EN 720to1080No Conv Additional settings Additional When this function is set to OFFFor Example When this function is set to OFF, you can record on D-VHS 58 ENPause OUT Link VCR only AV Compulink  S-VHS ET Link Set Up Link set up for connected device60 EN Link Branched Connection What is i.LINK?Link Connection Link Connection ExamplesMake sure the record safety tab is intact Set timer program on DBS receiverEngage Satellite Auto Recording standby Mode 62 ENSet Jlip ID Number Jlip IDDesired ID number LINK/DV Connections 64 ENConnection with the camcorder Make connectionsSelect input location on this VCR Connection with the VCRVarious connection for editing tapes VIDEO/ Video Connections66 EN CamcorderTV/VCR CH + To use a Master Edit Control-equipped JVC camcorderOn the front panel Press Channel + On the Remote Input SourceTV Brand Setting 68 ENEnter cable box brand code Cable Box Brand SettingTurn on the cable box Operate cable boxBrand Setting DBS Receiver70 EN Check remote control code for VCR Changing Remote Control CodeSet remote control code for Remote Turn off VCRTroubleshooting 72 ENRecording 74 EN Video Navigation Other Problems 76 ENPicture stops/There is no sound Playback of tapes recorded in D-VHS modeSearching images on D-VHS tapes Image or sound is distortedError Codes and Messages 78 EN‰ remain lit on the front display panel Is there a problem? Can the VCR indefinitely remain in still mode?What happens if the tape reaches its end during recording? Linear PCM Audio 80 ENDigital Broadcasts and D-VHS Dolby DigitalList of terms 82 EN Front panelRear panel OUT84 EN Front display panelOn-screen display How to use the Remote 86 ENLinear PCM HS/STD VHFUHF HOW to Locate Your JVC Service Center 88 ENLimited Warranty 90 EN MemoHM-DH40000U-EN72-91 22/3, 544 PM MV8300/U1B

MV8300_U1B specifications

The Marantz MV8300_U1B is a state-of-the-art component that exemplifies high-fidelity audio reproduction, tailored for music enthusiasts who appreciate both quality and craftsmanship. As part of Marantz's esteemed line of audio products, the MV8300_U1B combines advanced technology with practical usability, making it a standout choice for home theater setups and dedicated audio systems.

One of the most notable features of the MV8300_U1B is its exceptional power output, capable of delivering a robust performance that effortlessly drives demanding speakers. With a substantial total harmonic distortion rating, the amplifier ensures that the audio signal remains clean and undistorted, allowing listeners to experience music as it was intended by the artists. The unit's power rating makes it suitable for various settings, whether for intimate listening experiences or grand home theater presentations.

Incorporating advanced class D amplification, the MV8300_U1B achieves high efficiency without compromising sound quality. This technology allows for a more compact design while still providing significant power reserves, resulting in impressive dynamic range and clarity. The amplifier is engineered to produce an immersive soundstage with detailed imaging, providing listeners with a unique auditory experience.

Connectivity options are plentiful on the MV8300_U1B, including multiple line inputs for versatile integration with various audio sources. The unit also features built-in DAC capabilities, allowing for the conversion of high-resolution digital audio formats, which adds convenience for those who stream music and use digital devices. With Marantz's commitment to quality craftsmanship, the MV8300_U1B is built using premium components, further enhancing its performance and reliability.

The design of the MV8300_U1B reflects Marantz's dedication to aesthetics as well as functionality. Its sleek, modern appearance is characterized by a minimalist front panel, intuitive controls, and LED indicators that provide clear feedback. The robust construction not only contributes to its durability but also helps minimize vibration, ensuring that audio performance remains unaffected.

Additionally, the MV8300_U1B includes advanced thermal management systems that prevent overheating, allowing for continuous operation during long listening sessions. This ensures that the amplifier maintains its performance and longevity, providing owners with a reliable audio solution for years to come.

In conclusion, the Marantz MV8300_U1B is an excellent choice for audiophiles seeking a powerful amplifier that combines cutting-edge technology with superb audio reproduction. Its impressive features, robust build quality, and aesthetic appeal make it an ideal addition to any serious audio setup.