Goldstar GBV441 owner manual DVD Operation Setup, Sound, Others

Page 19

DVD Operation Setup (Continued)

Sound

Digital Audio Output

Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.

DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select Stream/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.

PCM: Select when connected to a 2 channel digital stereo amplifier. The DVD+VCR outputs sounds in the PCM 2ch format when you play a DVD video disc recorded with a Dolby Digital, MPEG1, or MPEG2 recording system.

 

 

Disc Audio

DIGITALDOLBY /PCM

 

 

Disc Subtitle

Stream/PCM

 

 

Disc Menu

PCM

 

 

Rating

 

 

 

Country Code

Sample Freq.

 

 

TV Aspect

48 KHz

 

 

Menu Language

96KHz

 

 

Progressive Scan

 

 

 

Digital Audio Output

 

 

 

5.1 Speaker Setup

 

 

 

Others

 

Sample Frequency

To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated above.

If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.

If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.

Others

The DRC, Vocal and Auto Play settings can be changed.

Use v/V to select the desired option and then press ENTER repeatedly to select On or Off.

 

Disc Audio

DRC

On

 

Disc Subtitle

Vocal

On

 

Disc Menu

Auto Play

Off

 

Rating

 

 

 

Country Code

 

 

 

TV Aspect

 

 

 

Menu Language

 

 

 

Progressive Scan

 

 

 

 

 

 

 

Digital Audio Output

 

 

 

5.1 Speaker Setup

 

 

 

Others

 

 

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound.

Auto Play DVD

You can set up the DVD Player so a DVD disc automat- ically starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, this DVD player will search for a title that has the longest playback time and then play back the title automatically.

On: Auto Play function works.

Off: Auto Play function does not work.

ote

The Auto Play function may not work for some DVDs.

PREPARATION

19

Image 19
Contents DVD Player+ Video Cassette Recorder Regulatory Information FCC Part Safety PrecautionsImportant Safety Instructions Table of Contents Playable Discs Remote Control Battery InstallationRemote Control Operating Range Before UseAbout Symbols PrecautionsSelecting the Viewing Source Front Panel Controls REC Display WindowRemote Control ANT.IN Antenna Input Connections PanelVideo OUT DVD OUT Digital Audio OUT Coaxial DVD OUTConnections Connecting Antenna/Cable TV toAudio/Video connection Connections Basic TV ConnectionsOptional, Preferred TV Connections RF coaxial connectionDigital Multi-channel sound Accessory Audio/Video A/V Connections toAmplifier Receiver On-Screen Menus Setup VCR Operation Setup On-Screen Display OSDMenu Selection Channel Selection VCR Operation Setup VCR Setup Menu OptionsAuto Clock Set VCR Operation Setup Setting the ClockManual Clock Set On-Screen Display DVD Operation Setup General ExplanationOn-screen display operation Picture DVD Operation Setup Initial SettingsGeneral Operation LanguageSound DVD Operation SetupOthers Rating DVD Changing the 4-digit passwordIf you forget your 4-digit password Parental ControlSpecial Effect Playbacks VCR Operation Normal PlaybackTo record one TV program while watching another Timer RecordingVCR Operation Normal Recording To pause recordingVCR Operation Checking Erasing Timer Record ProgrammingProgram Priority Checking the Recording Time Instant Timer RecordingTo extend the Recording Time MTS Multi-Channel TV Sound Multichannel TV Sound Indicator MTSVHS Hi-Fi Stereo System MTS Broadcast Playback with Hi-Fi Stereo Audio SoundAdditional Information VCR Operation Tape Counter Memory FeatureDVD Operation Playing DVDs General FeaturesDVD Operation General Features Special DVD Features About WMA Window Media Audio Files About MP3Audio CD and MP3/WMA Disc Operation To flip the picture Jpeg File Operation Viewing Jpeg Files on a Disc JpegSelecting other Files Still PictureProgrammed Playback with Audio CDs and MP3/WMA Discs Programmed Playback CD MP3 WMATV Control Buttons By pressing You can Controlling Your TV with the Supplied RemoteControlling other TVs with the remote Code numbers of controllable TVsSymptom Cause Correction TroubleshootingDVD+VCR Moisture Condensation Language Code Language Code ListCode Country Country Code ListGeneral SpecificationsVCR Specifications DVD SpecificationsLG Electronics U.S.A., INC Sylvan Avenue Warranty Period HOW Service is HandledFor Warranty Service Customer INTER-ACTIVE Center Numbers