DVD Operation (Continued)
General Features (Continued)
Marker Search | DVD | MARKER SEARCH | |
1/9 | |||
|
|
You can start playback from a memorized point. Up to nine points can be memorized.
To enter a mark, follow these steps.
1During disc playback, press MARKER when playback reaches the spot that you want to memorize.
The Marker icon will appear on the TV screen briefly.
2Repeat step 1 to enter up to nine Marker points on a disc.
To Recall a Marked Scene
1During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2Within 10 seconds, use 1/2 or number button to select a Marker number that you want to recall.
3Press ENTER.
Playback will start from the Marked scene.
4To remove the MARKER SEARCH menu, press
SEARCH.
To Clear a Marked Scene
1During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2Within 10 seconds, use 1/2 or number button to select a Marker number that you want to erase.
3Press CLEAR.
The Marker number will be erased from the list.
4Repeat steps 2 and 3 to erase additional Marker numbers.
5To remove the MARKER SEARCH menu, press
SEARCH.
All markers are erased when the disc is ejected.
Changing Video Mode DVD
With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or
To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until pic- ture quality is improved.
Video mode sequence:
MODE1 → MODE2 → MODE3 → MODE1
If you turn off the power, the video mode will return to initial default state (MODE1).
Detailed Description of each Video Mode
MODE1 : The source material of the DVD video (film material or video material) is determined from disc information. MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method. MODE3 : Suitable for playing video based content with
comparatively little motion.
ote
The video mode setting only works when the Progressive Scan option is set to “On” in the Setup menu.
Special DVD Features
Checking the contents of DVD Video discs: Menus
DVDs may contain menus that allow you to access spe- cial features. To use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option. Or, use b/B/v/V buttons to highlight your selec- tion, then press ENTER.
Title Menu DVD
1Press TITLE.
If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu may appear.
2The menu can list camera angles, spoken language and subtitle options, and chapters for the title.
3To remove the title menu, press TITLE again.
Disc Menu DVD
1Press DISC MENU.
The disc menu is displayed.
2To remove the disc menu, press DISC MENU again.
Camera Angle |
|
|
|
|
DVD |
| 1 /1 |
| |
|
|
| ||
|
|
|
If the disc contains sequences recorded from different camera angles, the angle icon blinks on the TV screen. You can then change the camera angle if you wish.
Press ANGLE repeatedly during playback to select a desired angle.
The number of the current angle appears on the display.
Changing the Audio Language DVD
1 ENG D 5.1 CH
Press AUDIO repeatedly during playback to hear a different audio language or audio track.
Subtitles | DVD | ABC | 1 ENG |
Press SUBTITLE repeatedly during playback to see the different subtitle languages.
ote
If appears, the feature at that moment or with that specific DVD.
OPERATION
29