GoVideo DV3130 manual Using the TV Buttons on the Remote Control, Brand Codes

Using the TV Buttons on the Remote Control

		Your VCR remote control will operate many brands of television.
A		To determine whether your television is compatible, follow the instructions
		below.
	1		Turn on your television.
	2		Point the remote control at the television.

3Hold down the TV button and enter the two-digit code corresponding to the brand of your television, by pressing the

			appropriate number buttons.
			Brand	Codes	Brand	Codes
	B	C
			SAMSUNG	01, 14, 15, 23	LOEWE	28
			SHARP	02, 16, 22	ZENITH	17
D			SONY	03	LG	06, 08, 18
			RCA	07, 29	MAGNAVOX	04
			TOSHIBA	09	EMERSON	21
			PANASONIC	12, 24	SANYO	05, 20
			JVC	11	DAEWOO	19
			HITACHI	10	NOBLEX	25
			MITSUBISHI	13	TELEFUNKEN 26
			NEWSAN	27

E	Result: If your television is compatible with the remote control, it
	will turn off. The remote is now programmed to operate
	your television.

➢ If several codes are indicated for your television brand, try each one until you find one that works.

☛ When you change the batteries in the remote control, you must reprogram the code, following the same procedure.

You can then control the television using the following buttons.

Button	Function
A. POWER	Turns the television on and off.
B. VOL + or –	Adjusts your television volume.

C. CHANNEL / Selects the desired channel on your television.

D. TV MUTE	Toggles the television sound on and off.
E. TV VIEW	Selects external sources connected to your
	television.

➢These functions do not work on all televisions.

12