GoVideo DV3130 manual Dts, Set DTS

DTS

Language : English

Front Display : Auto

If your A/V receiver is equipped with a DTS decoder, your DVD+VCR can output DTS digital sound, but you MUST enable this feature in the menu system.

NOTE: Select “On” ONLY if you have connected a DTS-equipped A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on the DVD+VCR back panel.

1Open “Initial Setup” menu

Press the SETUP button while the DVD is in Stop mode.

2Select “DVD”

Use the / buttons to highlight “DVD”, then press ENTER to select.

3Select “Audio”

Use the / buttons to highlight “Audio”, then press ENTER to select.

4Set “DTS”

Use the / buttons to highlight “DTS” then press the  button to select one of the following options:

•Off - To use your DVD+VCR with an A/V receiver NOT equipped with a DTS decoder.

•On – To use your DVD+VCR with an A/V receiver equipped with a DTS decoder.

Off

On

PCM Down Sampling : On

28