Parental
Rating Control is a
•If you try to play a DVD that exceeds the selected rating, an error message will appear.
•Not all discs are rated.
1Open “Initial Setup” menu
Press the SETUP button while the DVD is in Stop mode.
2Select “DVD”
Use the / buttons to highlight “DVD”, then press ENTER to select.
3Select “Parental”
Use the / buttons to highlight “Parental”, then press ENTER to select.
4Select “Use Password”
Use the / buttons to highlight “Use Password”, then press the button to select one of the following options:
•Off - No password is necessary to view a DVD or to change the Rating Level. No additional settings are necessary.
•On - A password is necessary to view a DVD and to view the Rating Level. The menu will change as shown.
NOTES:
•The first time “Require Password” is set to “Yes,” you will be prompted to enter a new password.
•If the “Enter Password” screen appears, then “Require Password” has already been set to “Yes.” Please skip to Step 5.
•There is no Default Password.
5Enter Password
Use the number buttons
•Write your password down, and keep it in a safe place in case you need it to change your settings later.
6Select “Rating Level”
Use the / buttons to highlight “Rating Level”, then press ENTER to select.
7Change Rating Level
Use the / buttons to select one of the following ratings:
• | Level 8 Adult | • | Level 4 |
• | Level 7 | • | Level 3 |
• | Level 6 | • | Level 2 |
• | Level 5 | • | Level 1 Kids Safe |
All ratings above the level you select will also be blocked, e.g., if you block Level 6, then Levels 7 and 8 will also be blocked. Press ENTER to confirm your selection.
•If you forgot your password, press power on from a cold start with no disc in the unit. Press the REW and FF buttons simultaneously on the front panel for 5 seconds. The “Reset OK” message will appear.
34