GoVideo DVP950 manual Connections, Connecting Antenna/Cable TV to

Page 12

Connections

Tips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use only one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

For better sound reproduction, connect the DVD+VCR’s DVD/VHS AUDIO OUT jack to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See Connecting to optional equipment on page 14.

Caution

Make sure the DVD+VCR is connected directly to the TV. Tune the TV to the correct video input channel.

Do not connect your DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.

Without Cable Box

If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANT.IN connector on the DVD+VCR. Use the supplied round coaxial cable to connect between the unit’s RF. OUT connector and the 75 ohm antenna input connector on the TV. With this connection, you can receive all channels.

With Cable Box

If a converter is required in your cable system, follow the instructions below:

The cable hookup permits both TV and DVD+VCR operation.

To view or record CATV channels

1Tune the TV to the DVD+VCR output channel (CH 3 or 4).

2Set the DVD+VCR channel selector to the output channel of the Cable Converter box by pressing the CH/TRACK (▲/▼) or the number keys (0-9) of your DVD+VCR. (Example:

CH3)

3Select the channel to view at the Cable Converter Box.

Connecting Antenna/Cable TV to

DVD+VCR

1 TV.Disconnect the antenna leads from the rear of the

2a round cable as illustrated, it is a 75 ohm coaxial

antenna cable. This cable will connect directly to the connector marked ANT.IN on your DVD+VCR.Identify the type of cable from your antenna. If it is

Tip

If your antenna lead wire is a flat type antenna cable, connect it to an Antenna Adapter (300-ohm to 75- ohm) (not supplied) and slip the Adapter onto the ANT.IN connector. The Adapter does not screw on to the DVD+VCR, it just slips over the connector.

Antenna Antenna

Cable TV

Wall Jack

Flat Wire

 

 

(300 ohm)

 

 

300/75 ohm

OR

OR

Adaptor

 

 

(Not provided)

 

 

Rear of DVD+VCR

Notes

With this connection, you CANNOT record one program while viewing another.

If you are using a cable box to tune channels, it is not nec- essary to do Auto Channel Programming as indicated on page 16.

Cable TV

Wall Jack

Back Panel of

Typical Cable Box

Rear of DVD+VCR

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Safety Precautions Regulatory Information FCC PartPower Sources CleaningPower-Cord Protection Power LinesAccessories Damage Requiring ServiceReplacement parts Safety CheckTable of Contents Remote control battery installation Remote Control Operation RangeBefore Use Playable DiscsPrecautions About SymbolsFront Panel Display Window Remote Control Plug into the power source Rear PanelConnect the VHF/UHF/CATV antenna to this terminal Connect to a TV with RF coaxial inputsConnecting Antenna/Cable TV to ConnectionsConnections Basic TV Connections Optional TV ConnectionsRF coaxial connection Audio/Video connectionAccessory Audio/Video A/V Connections to Connections Optional Equipment ConnectionsDigital Multi-channel sound Amplifier ReceiverVCR Setup On-Screen Display OSD Setting the On-Screen DisplayMenu Selection VCR Setup VCR Setup Menu Channel SelectionVCR Setup Setting the Clock Press Menu when finishedAuto Clock Set Manual Clock SetDVD Setup General Information On-Screen DisplayOn-screen display operation DVD Setup Initial Settings Initial Settings General OperationLanguage PictureDVD Setup SoundOthers Password DVD Parental ControlRating DVD Changing the 4-digit codeVCR Operation Normal Playback Special Effect PlaybacksTimer Recording Timer Record menu will appearPress 1 or 2 to choose the Program No Checking Erasing the Timer Program VCR OperationProgram Priority One-Touch Recording Checking the Recording TimeTo extend the Recording Time Dubbing and EditingMultichannel TV Sound Indicator MTS VHS Hi-FI Stereo System MTS BroadcastMTS Multi-Channel TV Sound Playback with Hi-Fi Stereo Audio SoundVCR Operation Tape Counter Memory Feature Additional InformationReal-Time Counter Counter Memory FunctionGeneral Features DVD and Audio CD Operation Playing a DVD and Audio CDDVD and Audio CD Operation General Features Search DVD CDRandom CD Repeat DVD CDTime Search Zoom DVDMark Search Changing the Audio Language DVDDVD and Audio CD Operation Special DVD Features Programmed Playback with Audio CDMP3 Operation Playing MP3 DiscsAbout MP3 MP3 disc compatible with this DVD+VCR is limited as followsMP3 Operation Programmed Playback with MP3 Discs Repeat Playback with MP3 DiscsErasing a Track from Program List Erasing the Complete Program ListTroubleshooting Symptom Cause CorrectionMoisture Condensation Language Code List Code LanguageTechnical Specifications VCR SpecificationDVD Specification GeneralWarranty DVD+VCR Limited Warranty Who Provides the Limited WarrantyWhat is Covered and How Long Who is Protected
Top Page Image Contents